Products in Bookbinding

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

VINNAPAS® DP 55 is a fast-setting aqueous, low-viscosity PVOH-stabilized homopolymer dispersion produced from vinyl acetate monomer. VINNAPAS® DP 55 is plasticizer-free. VINNAPAS® DP 55 can be used as a raw material for paper and packaging adhesives as well as bookbinding adhesives.

VINNAPAS® EP 701K (NJG) is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints. Additionally, it provides high cohesion, ensuring strong and durable bonds.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

VINNAPAS® EP 708 (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion that offers good machinability and strong wet tack. It provides better adhesion to films, including polyvinyl chloride, and exhibits good adhesion to various plastic surfaces. The adhesive joints formed with this product are permanently flexible and have high cohesion.

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

VINNAPAS® EP 758 is a high-viscosity, high-solid vinyl acetate-ethylene copolymer dispersion with low levels of formaldehyde and free VAM residue. It offers excellent machinability and strong wet tack. VINNAPAS® EP 758 demonstrates chemical stability at both high and low pH levels. It is also compatible with various resins, solvents, plasticizers, and other modifiers, as well as other VINNAPAS® EP dispersions.

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

VINNAPAS® EP 705K (ULS) is a vinyl acetate-ethylene copolymer that is protected with PVOH. It has a moderate viscosity and is produced without the use of formaldehyde donors. The polymer's backbone provides the dried adhesive film with toughness and flexibility, which remain even when exposed to water immersion and temperature fluctuations.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

Flyeva 102H is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.

Flyeva 102 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Texicryl® 13-665 is designed for use in a broad range of formulations where low VOC is required. It has been specifically designed MIT free to meet the new regulatory requirements for artist’s color paints. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. This emulsion is cross-linkable with thermoset resins, compatable with solvents and other resin systems. It is suitable for inks used on absorbent substrates such as packaging materials and wallpapers. It can also be used in bottle labeling adhesives.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Texicryl® 13-224 is a self crosslinking styrene acrylic copolymer emulsion with soft handle and good wet scrub resistance properties. It gives excellent binding properties for pigment printing of textiles. It maybe used on both rotary as well as flat frameworks.

Texicryl® 13-828 is a highly efficient alkali swellable emulsion designed for water-based printing ink formulations. The product has been designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.