Products in Reseal & Reclosable

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

VIVAPUR® Alginate FD 170 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 170 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

VIVAPUR® Alginate FD 127 is a sodium alginate in form of a brown fine granule. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 127 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

VIVAPUR® Pectin LA-S20 VIS-YA is a water solvable amidated pectin in form of a beige powder. It can be used to form a thermo-reversable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LA-S20 VIS-YA is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

VIVAPUR® HPMC K4M is a medium viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K4M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K4M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Pectin LC-S18XH is a water solvable pectin with a low degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LC-S18XH is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

VIVAPUR® HPMC K15M is a high viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K15M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K15M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Pectin HS RV is a water solvable pectin with a high degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel under acidic conditions in the presence of high sugar concentrations. VIVAPUR® Pectin HS RV is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

VIVAPUR® Alginate FDG 155 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FDG 155 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Tykote 1019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent film strength properties. It is intended for use as a base polymer in the formulation of barrier coatings for paper and paperboard packaging. Tykote 1019 imparts excellent water resistance, and has good adhesion to a wide variety of surfaces. Tykote 1019 is recommended for use in paper and paperboard coatings where a high degree of water and water vapor resistance is needed. It may also be formulated into barrier laminating adhesives for paper-to-paper, paper-to-film, and foil-to-paper. Request the Tykote Products for Excellence in Barrier Coatings bulletin to learn more. Regulatory Status Detailed global food contact compliances are available upon request. Tykote 1019 is synthesized to meet European regulatory requirements.

VIVAPUR® Alginate FD 155 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 155 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

VIVAPUR® Alginate FD 176 is a sodium alginate in form of a creamy-white powder. With the addition of higher valent ions (e.g. Ca2+) it can be used to form gels or biobased and transparent films, which provide oil and oxygen barrier properties. VIVAPUR® Alginate FD 176 is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

EBECRYL® 525 is a modified polyester resin expertly diluted with 40% tripropyleneglycol diacrylate. This product is particularly well-suited for applications in laminating adhesives, contributing to effective bonding between materials like paper/aluminum, paper/LDPE, and paper/polypropylene, among others. Additionally, EBECRYL® 525 finds recommendations for use in screen ink vehicles, providing good inter-coat adhesion, and as an adherable primer coating on metals. Its attributes include faster cycle time, low-temperature curing, low energy consumption, and long pot life, making it a good choice for radiation-curable coatings.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Kolon Industries HIKOREZ® C-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. And, this grade shows reinforced adhesive strength in the pressure sensitive adhesives because of its higher molecular weight compared to HIKOREZ® A-1100. .

Kolon Industries SUKOREZ® SU-110S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-110S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kolon Industries HIKOREZ® A-1100S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking. .

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Kolon Industries SUKOREZ® SU-420 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-420 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Kolon Industries HIKOREZ® T-1100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. It is used together with natural rubber for solvent based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Isoprene-Styrene copolymer (SIS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). .

Kolon Industries SUKOREZ® SU-230S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230S is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers, and metallocene polyolefins and APAO.

Kolon Industries HIKOREZ® T-1095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA) or Styrene-Isoprene-Styrene copolymer (SIS), and is mainly used as tackifier for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA). HIKOREZ® T-1095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA. .

Kolon Industries SUKOREZ® SU-90 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-90 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Kolon Industries HIKOREZ® H-2100 is a pale yellow thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha, and offers better colorand heat stability, and lower odor than the previous C5 hydrocarbon resins. This product offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS), and is used as tackifier. HIKOREZ® H-2100 is light color cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO. .

Kolon Industries HIKOREZ® A-1115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

Kolon Industries HIKOREZ® T-3095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Kolon Industries SUKOREZ® SU-401 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-401 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.