Products in Paints & Coatings: Solventborne Ink

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL A3RJ Indanthrone Blue, PB.60 is a strong red shade and highly saturated blue pigment that combines very good tinctorial properties with excellent fastness properties. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL 1242L Disazo Scarlet, PR.242 is a yellowish shade, red pigment with excellent fastness properties. It shows excellent resistance against ethanol and water. It is mainly applicable in Plastics such as PVC, PE, PP, PS and fiber. Automotive/aerospace, industrial and powder coatings. Solvent flexo and water flexo inks etc.

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL A2RX Indanthrone Blue, PB.60 is a highly saturated, red-shaded blue that offers excellent tinctorial and fastness properties. It is highly transparent and suitable for opaque and effect shades, and especially recommended for high-quality automotive coatings, laminates, specialty coatings, and inks.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 5021 Milori Blue, PB.27 is an iron blue pigment with a deep, pure blue shade and good opacity for solvent ink and coatings applications. 5021 Milori Blue is often used as toner for carbon black and be mixed with phthalo blue pigments for multi-color printing.

DCL 06-905 DNA Orange, PO.5 is a bright, semi-opaque orange pigment with good lightfastness. It is used in some applications to replace molybdate oranges. However, due to its poor solvent stability in some solvents, it is not recommended for baking systems. It is recommended for trade-sale paints, air-dry industrial coatings, water, solvent, and UV based printing inks.

DCL 7322 Quinacridone Magenta, PR.122 has similar properties to DCC Red 7222, making it a suitable drop-in match for shade and strength to the market standard for universal coatings. It is a high-performance organic quinacridone red pigment with excellent fastness and durability properties, making it suitable for high-end coatings applications.

DCL 1120 Hansa Yellow, PY.74 is a semi-opaque green-shade yellow pigment with high tinctorial strength. It has excellent overall resistance properties and finds major applications in decorative, industrial, and powder coatings, as well as solvent flexo and water flexo inks.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL 5154 Phthalocyanine Blue, PB.15:4 is a beta-type, non-crystallizing, non-flocculating green-shade phthalocyanine blue, recommended for various coatings and printing ink applications. It is FDA-approved (Section 178.3297) and is recommended for use in various industrial paint applications, such as air-dry and baking alkyds, as well as nitrocellulose and polyamide inks.

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 5577 Phthalocyanine Blue, PB.15:3 is a greenish blue shade of phthalocyanine blue with excellent color strength. 5577 is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, and heat stability. This makes it a reliable and versatile choice for a range of coating and ink applications.

DCL 410 Carbon Black, PBk.6 (Granular) is a smaller particle size, low cost granular carbon black pigment. It is the most jet of our low-cost carbon blacks however, it has the highest viscosity. 410 is particularly suitable for coatings, plastics requiring excellent UV properties, and solvent-based inks.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL 2197 Azo Yellow, PY.97 is a versatile pigment that offers a vibrant green shade of yellow, along with excellent light and weather fastness, especially in deep shades. This high-opacity pigment also boasts good flow properties and bleed characteristics, making it a great choice for a variety of applications.

DCL A2RU Indanthrone Blue, PB.60 is a high-performance green shade yellow for use in high-end coatings applications. Its superb weather fastness and chemical resistance make it ideal for automotive OEM, refinish, and fleet applications. Additionally, its enhanced rheology and low foam enable high mill base loadings in both aqueous and solvent-borne systems. For non-automotive applications, it is also excellent for use in architectural concrete coatings and high-end industrial coatings.

DCL 2194 Benzimidazolone Yellow, PY.194 is a bright, green-shaded yellow with very good light and weather fastness, especially in deep shades. This product has relatively high opacity, good flow properties, good overall resistance properties, and good bleed characteristics. It is mainly used in plastics, high-end coatings, and inks.

DCL 8916 Transparent Yellow Iron Oxide, PY.42 is a high-performance transparent yellow iron oxide offering high color strength, weather resistance, and UV protection properties. 8916 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 1166 Disazo Scarlet, PR.166 is a transparent, yellow-shaded red with excellent heat stability and very good fastness properties. It is recommended for auto refinishes, solvent industrial coatings, and powder coating applications. It is also recommended for all ink and plastic applications.

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 1146 Naphthol Red, PR.146 is a blue-shaded, semi-transparent naphthol red with good overall fastness properties. This pigment is a possible alternative to pigment red 57:1 types where an improvement in fastness properties is needed. It is mainly used in various types of coatings, inks, and papers.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 1176 Benzimidazolone Red, PR.176 is a transparent, bright, blue-shaded red with good overall fastness properties. The product has a wide range of applications, including its use in plastics such as PVC, PP, PS and PE, as well as in powder and industrial coatings. Additionally, it is also used in solvent flexo and inkjet inks.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 1319 Quinacridone Red Violet, PV.19 (E3B-70 type), is a high-quality pigment known for its outstanding fastness, heat stability, and resistance properties. This opaque, yellow-shaded quinacridone is slightly more opaque and yellower than the 1219 Quinacridone Red Violet 19 grade.

DCL 1970-A Naphthol Red, PR.170 is a bright, blue-shaded naphthol red with good overall properties. It has a wide range of applications, including in plastics such as PVC and PE, as well as decorative, powder, and industrial coatings. It is also used in solvent flexo, inkjet, offset, and UV inks.

DCL 2355 Opaque Yellow, PY.155 is an opaque, strong, green-shaded yellow pigment with good rheology and lightfastness properties. This pigment is mainly recommended to be used in water flexo, solvent flexo and UV inks, as well as industrial coatings.

DCL 8086 Rutile Titanium, PW.6 (Sulfate) is a durable rutile titanium dioxide with good hiding power manufactured by the sulfate process. 8086 is surface treated alumina and silica to improve the dispersibility. It is mainly recommended for the construction industry.

DCL 2538 Quinophthalone Yellow, PY.138 is an opaque, green shade yellow with low viscosity in liquid systems and excellent light and weather fastness. It is greener than 2338 and exhibits high hiding power and good dispersibility. 2538 is FDA-approved (21 CFR Part 178.3297).

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.