Products in Adhesives & Sealants: Polyols

Venadol® 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Cardolite® NX - 9201LP is a polyester diol based on cashew nutshell liquid technology.

Cardolite® NX - 9203LP is a polyester diol based on cashew nutshell liquid technology.

Dispelair® CF 394 is a polyglycol based foam control agent. It is suitable for use in all types of PCES, highly effective in HPEG, MPEG and VPEG PCE production and are particularly effective when high compatibility and clarity are required within the PCE.

Dispelair® CF 395 is a polyglycol based foam control agent. It is suitable for use in all types of PCES, highly effective in HPEG, MPEG and VPEG PCE production and are particularly effective when high compatibility and clarity are required within the PCE.

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.

Purol® R-06 has Phthalic Andydride base used as adhesives, PUR hot melts, PU coatings, PU rigid foam, Elastomers.

PETOL® 110-2 A is a 1000 average molecular weight homopolymer diol, high purity polyoxypropylene glycol, acidified with a low level of phosphoric acid.

CARPOL® GP-3000 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® GP-3000 may also be included as a component in other urethane products and formulations.

CA - 4030 is Applied In Adhesives, PU Resins, Paints Coating, Elastomer, PU Elastomer Fiber.

CARPOL® GP-6307 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300. This triol is polymerized with propylene oxide and then capped with 7% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, Carpol® GP-6307 may also be included as a component in other urethane products and formulations.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3031 is chrome oxide green colored.

Quickstar™ 240MC is a dendrimeric polyol which is nearly a solid, but dilutes to a much lower viscosity with very little solvent. Fast drying. Offers excellent chemical resistance, hardness and abrasion resistance.

Puranol D 280 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

ELAPOL 6520 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

AltroColor PU 1909 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1909 is chrome green colored.

Jurong Ningwu New Material Development NJ-210D can be used to produce coatings, adhesives, sealants, elastomers, etc.

AFEX™ SB23C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

CARPOL® PGP-400 is a propylene glycol initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to the lower viscosity of b-side material while helping control crosslinking. In addition, it may also be utilized in a number of C.A.S.E. applications. Carpol® PGP-400 is polymerized solely with propylene oxide for controlled reactivity.

Jurong Ningwu New Material Development NJ-2080D can be used to produce coatings, adhesives, sealants, elastomers, etc.

Jurong Ningwu New Material Development NJ-3030 can be used to produce coatings, adhesives, sealants, elastomers, etc.

CARPOL® EDAP-770 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

AltroColor PU 1911 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1911 is light-yellow colored.

Jurong Ningwu New Material Development NJ-220 can be used to produce coatings, adhesives, sealants, elastomers, etc.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

Swisloyd Pale Pressed Grade SL-co-pp is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

Pacapol™ A250 is economic polyol for high solids coatings. Offers excellent combination of hardness and toughness. Good chemical resistance. Excellent durability and water resistance.

PETOL 250-3 is a polyoxypropylene triol, 670-average molecular weight. This polyether triol is used in the manufacture of rigid, semi-rigid and special flexible polyurethane foams. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. The product is also used in blends for applications used in the production of coatings, adhesives and casting elastomers.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Korea PTG PTMEG-1400 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

AltroColor PU 1910 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1910 is ultramarine blue colored.

Korea PTG PTMEG-250 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

AltroColor PU 1900 Black Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems As our AltroColor PU 1900 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 1900 is black colored.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3033 is ultramarine blue colored.

CA - 2010 is Applied In Adhesives, Paints Coating, Elastomer, PU Elastomer Fiber.

Protactinium Chemical DMS -1311 is a waterborne polyester polyol (11% dimethyl-5-sodiosulfoisophthalate (DMSIP)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.