Products in Paints & Coatings: Slip Agent

AFCONA 3233 is a slip and leveling additive for solvent- and water-based systems. It is recommended as a slip and leveling agent for all solvent-based coatings to prevent Bénard Cells, provide leveling, and prevent craters. AFCONA 3233 can be used as leveling and anti-crater agent in both water- and solvent- based applications. However, this product may stabilize foam in water-based coatings.

AFCONA 3231 is a slip and leveling additive for metal and UV coatings that offers very good slip performance with an "oily" or "wet look" appearance to visually enhance film thickness. It is commonly used in industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

AFCONA 3238 is an additive designed as a slip and leveling agent that also offers defoaming. For matte finish coatings, the addition of AFCONA 3238 will help in the orientation of matting agents. In UV curing systems, this product further reduces gloss when added together with a matting agent.

AFCONA 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam. It is specially developed for all solvent-based systems where slip is the most important factor and foam stabilization is undesirable. AFCONA 3250 belongs to the same family as AFCONA 3230. But while AFCONA 3230 is effective only in polyurethane coatings, AFCONA 3250 works in all solvent-based coatings.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

AFCONA 3236 is an additive designed to provide slip and leveling, as well as good defoaming performance. It is an alkyl-modified polysiloxane that offers excellent slip and leveling properties. Unlike other organically modified polysiloxanes, AFCONA 3236 acts as a defoamer and does not stabilize foam in most systems, making it suitable for foam-sensitive applications such as floor coatings and high-build systems.

AFCONA 3570 is a leveling and anti-crater agent for aqueous coatings with a low foam stabilizing effect. It is a fluorocarbon modified polyacrylic, neutralized with a suitable amine, and dissolved in water. It is suitable for all water-based paints and is recommended for use in all kinds of water-based coatings with a pH value of 8.0 or higher.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

AFCONA 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam. AFCONA 3251 is specially developed for solvent-based systems where slip is the most important factor and foam stabilization is undesirable. Its performance is similar to AFCONA 3250, only with better leveling.

AFCONA 3239 is an additive designed as a slip and leveling agent that also offers defoaming. It is a very suitable leveling agent for epoxies, and will not stabilize foam, but instead act as an effective defoamer in such systems.

AFCONA 3085 is a slip and leveling agent terminated with hydroxyl functional groups. It is a polysiloxane-based polymer with di-hydroxyl functional groups at both ends, allowing it to cross-link in polyurethane systems and heat-cured paints. With its cross-linking properties, AFCONA 3085 is specially designed to give permanent slip to polyurethane coatings and heat-cured paints.

AFCONA 3285 is a slip and leveling additive that is terminated by di-hydroxyl functional groups. This polysiloxane-based polymer enables it to crosslink in polyurethane systems as well as heat-cured paints, providing permanent slip to the finished coatings. AFCONA 3285 is recommended for all types of solvent-based coatings, especially wood coatings.

AFCONA 3034 is an additive designed to reduce surface tension, improve substrate wetting, and provide anti-crater performance and leveling, including vertical leveling. Its fluorocarbon modification gives it a very low surface tension, further enhancing its performance in anti-crater properties, substrate wetting, and leveling.

AFCONA 3580 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. AFCONA 3580 is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

AFCONA 3031 is a polyether modified polysiloxane slip and leveling additive used primarily in metal and UV coatings. It provides a very good slip performance, which is characterized by an "oily" or "wet look" appearance that can visually enhance film thickness. AFCONA 3031 is used in metal coatings, such as industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

AFCONA 3670 is an anti-crater, substrate wetting and leveling agent for solvent-based coatings. AFCONA 3670 is an improved version of AFCONA 3777 on managing surface control of coatings. It has lower surface tension than AFCONA 3777. The combination with a suitable polysiloxane for better overall performance is highly recommended.

AFCONA 3232 is an additive designed as slip and leveling for solvent-based coatings. It is the solvent-free version of AFCONA 3033. AFCONA 3232 is an end modified special polysiloxane. With this modification, it enhances coatings slip performance and surface smoothness. The slip characteristic is dry type, which makes it very suitable for wood coatings and thermoplastic character resins.

AFCONA 3230 is an additive designed to offer excellent slip without stabilizing foam in polyurethane coatings. Most polysiloxane additives that provide good transparency also stabilize foam, and those that don't stabilize foam often adversely affect the transparency of the coating. AFCONA 3230 is specifically formulated for polyurethane systems where excellent slip is required but foam stabilization is not desired.

AFCONA 3033 is an additive designed to improve the slip and leveling performance of solvent-based coatings. It is an end-modified special polysiloxane, which enhances the dry slip characteristics of coatings, making it particularly suitable for wood coatings and thermoplastic resins.

AFCONA 3030 is a slip and leveling additive for both solvent and water-based systems. It is a polyether-modified polysiloxane and is recommended as a slip and leveling agent to prevent Bénard Cells and provide leveling and prevent craters. It can be used in both water- and solvent-based applications, though it may stabilize foam in water-based coatings.

Afcona - 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam.

Afcona - 3230 is an additive designed to offer excellent slip without stabilizing foam in polyurethane coatings.

Afcona - 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam.

Afcona - 3236 is an additive designed as a slip and leveling agent that also offers good defoaming performance.

AquaPoly 215 is Micronized oxidized polyethylene for rub resistance and slip in aqueous systems.Features and Benefits Provides good rub and mar resistance. Improves slip properties Imparts antiblocking Economical

PEL-SIL™ CL370 is an amino-functional siloxane with pendant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL™ CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

PEL-SIL™ CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. The EO component gives PEL-SIL™ CL330 coatings additive its compatibility with water-borne systems. PEL-SIL™ CL330 has excellent wetting and recoatability. It can be used at low dosage levels. PEL-SIL™ CL330 can be recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL™ CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes.

Slippery Agent

PEL-SIL™ CL290 is a organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL™ CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL™ CL290 is an excellent silicone-based additive for improving slip and mar resistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks.

S-232 MG is a micronized polyethylene-carnauba wax alloy. S-232 also is available in N1, N5 and SD3 grades.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.