Products in Adhesives & Sealants: Rosins

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

Ratnaka Resins Oil Soluble Maleic Synthetic Resin (Solid Content 50%) is applied in industry of adhesives, paint, and inks due to its property of water-res istance, durability, and brightness.

LUREFOR 100 is a pentaester ester of stabilized resin acids

Ratnaka Resins Synthetic Resin Ester Gum is applied in in industry of road marking paint, adhesive, coatings and inks.

SureTac 9227 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SureTac 1325 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

DRT Abalyn methyl ester of wood rosin is an amber-colored, near neutral, tacky, viscous liquid.

RESIESTER N 35 S is a pentaester ester of stabilized gum resin

Pine Rosins PR 097.43 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Foreverest Resources Glyceryl Rosinate (Industrial) G1004 is a Glycerol Ester of Gum Rosin, Ester Gum, GEGR. The Industry grade of Glyceryl Rosinate (a polyol ester of rosin), also called Glycerol Ester of Gum Rosin (GEGR), which is used for specialty industries of adhesives,coating and paints. It is also widely used in polymers including EVA, acrylics, polyurethanes, SIS and SBS.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

Ratnaka Resins Oil Soluble Maleic Synthetic Resin (Solid Content 100%) is applied in industry of adhesives, paint, and inks due to its property of water-res istance, durability, and brightness.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

V-TAC™ 8501

Foreverest Resources Colorless Glyceryl Hydrogenated Rosinate GEHR100H is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and edible glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent aging resistance, CGEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

SYLVALITE RE 100F rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100F exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

Pine Rosins PR 059.2 is a Polymerized rosins that are derivatives obtained by cationic dimerization of part of the resin acids present in the natural rosin. The main characteristic, compared to natural rosin is its higher softening point and this value depends on the concentration of dimers (and some trimers). The higher the percentage of dimers, the higher the softening point. The main use for this type of resins is the production of high melting point esters that need good compatibility with polymers and other low polarity ingredien.

Pine Rosins PR 510.3 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Hypale CH is a hydrogenated rosin developed by Arakawa chemical industries Ltd. It provides excellent resistance to oxidation and is stable under the storage of long period.

EST 5510 99 is a Glycerine ester of Gum Rosin.

TERGUM 42 is a liquid rosin triethylglycol ester, to be added to water based adhesive or to hot-melt formulations in order to increase tack properties.

RESIESTER N 35 V is a pentaester ester of highly stabilized gum resin