Products in Printing & Packaging: Pressure Sensitive Adhesive

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

TEGO® Antifoam 2-89 is an antifoam emulsion formulated with organo-modified siloxanes. This product functions as an anti-foaming agent, offering good compatibility with industrial processes. It belongs to the Industrial Additives and Materials category within the Construction Chemicals product family and is specifically tailored for use in cement and concrete additives.

DIACRON™ BioPES-002 is a solvent-based polyester resin developed for pressure-sensitive adhesives. With a biomass content of 86%, it is manufactured from plant-derived raw materials, excluding environmentally concerning plants such as palm and soybeans. When reacted with an isocyanate crosslinking agent, it functions as a polyester adhesive. As an acid-free polyester adhesive, DIACRON™ BioPES-002 does not cause metal corrosion and offers excellent adhesion to various substrates, including metals and non-polar plastics like polypropylene. Ideal for adhesive tapes, it combines high biomass content with strong adhesive properties, contributing to the prevention of global warming.

DIACRON™ BioPES-004 is a solvent-based polyester resin developed for pressure-sensitive adhesives. With a biomass content of 74%, it is manufactured from plant-derived raw materials, excluding environmentally concerning plants such as palm and soybeans. When reacted with an isocyanate crosslinking agent, it functions as a polyester adhesive. As an acid-free polyester adhesive, DIACRON™ BioPES-004 does not cause metal corrosion and offers excellent adhesion to various substrates, including metals and non-polar plastics like polypropylene. Ideal for adhesive tapes, it combines high biomass content with strong adhesive properties, contributing to the prevention of global warming.

DIACRON™ UVPES-101 is a UV cross-linkable polyester hot-melt polymer used in manufacturing self-adhesive articles. One of its key advantages is its solvent-free, bio-based composition, which provides excellent heat resistance and good holding strength. DIACRON™ UVPES-101 is designed for high-performance self-adhesive specialty labels and tapes in automotive, construction, printing, and packaging industries. These adhesives are ideal for use with hard-to-adhere resins such as PP, PE, and PET materials, ensuring reliable performance in demanding applications.

DIACRON™ BioPES-001 is a solvent-based polyester resin developed for pressure-sensitive adhesives. With a biomass content of 98%, it is manufactured from plant-derived raw materials, excluding environmentally concerning plants such as palm and soybeans. When reacted with an isocyanate crosslinking agent, it functions as a polyester adhesive. As an acid-free polyester adhesive, DIACRON™ BioPES-001 does not cause metal corrosion and offers excellent adhesion to various substrates, including metals and non-polar plastics like polypropylene. Ideal for adhesive tapes, it combines high biomass content with strong adhesive properties, contributing to the prevention of global warming.

DIACRON™ BioPES-003 is a solvent-based polyester resin developed for pressure-sensitive adhesives. With a biomass content of 83%, it is manufactured from plant-derived raw materials, excluding environmentally concerning plants such as palm and soybeans. When reacted with an isocyanate crosslinking agent, it functions as a polyester adhesive. As an acid-free polyester adhesive, DIACRON™ BioPES-003 does not cause metal corrosion and offers excellent adhesion to various substrates, including metals and non-polar plastics like polypropylene. Ideal for adhesive tapes, it combines high biomass content with strong adhesive properties, contributing to the prevention of global warming.

VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 67 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 67 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 67 may additionally be used as an adhesion promoter in adhesive formulations.

CRA® eco 17 is an extremely efficient controlled release additive used for adjusting the release force of solvent-free DEHESIVE® systems. It is derived from renewable raw materials and complies with the "Standard REDcert²." CRA® eco 17 offers the highest release values among all CRA® modifiers.

CRA® 42 is an exceptionally efficient controlled-release additive specifically designed to adjust the release force in solvent-free DEHESIVE® systems. It offers remarkable performance in achieving high release levels. Furthermore, CRA® 42 provides an extremely stable release, ensuring consistent and reliable results. It also boasts fast-curing properties.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

CRA® 23 is a highly efficient controlled-release additive designed to adjust the release force in solvent-based DEHESIVE® systems. As a solvent-based controlled release agent, it provides exceptional release levels. Moreover, CRA® 23 exhibits good release stability, ensuring consistent performance over time. It also boasts an excellent bathing life.

CRA® 21 is an exceptional controlled release additive specifically formulated for adjusting the release force in solvent-based DEHESIVE® systems. As a solvent-based additive, it delivers high release levels, making it highly efficient in its intended application. Additionally, CRA® 21 exhibits good release stability, ensuring consistent performance over time.

DEHESIVE® PSA 11 AP is a solvent-free, reactive silane mixture. Applied with addition-crosslinking DEHESIVE® or DEHESIVE® PSA-systems, it increases the adhesion to the substrate. The rub-off resistance of the cured silicone coating is improved significantly. It provides improved anchorage to unprimed PET film.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

CRA® EM 460 is a highly efficient controlled-release additive specifically developed for adjusting the release force of silicone emulsion-based DEHESIVE® systems. It is used in conjunction with coating polymers like DEHESIVE® EM 427 or DEHESIVE® EM 428 to create release coatings. The resulting system is designed for pressure-sensitive adhesive release applications and is compatible with papers of different porosities and films. The cure is achieved through a vinyl addition chemistry mechanism.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

Vinavil 2841 is a high solids pure acrylic polymer emulsion with high peel adhesion. It coats well on silicone-coated release paper.

Vinavil 2841NA is an ammonia-free, high in solids pure acrylic polymer emulsion with high peel adhesion. It also coats well on silicone-coated release paper.

H.B. Fuller® PN-3830-F is an APEO-free, self-crosslinking, non-carboxylated, waterborne acrylic adhesive in liquid form. It is suitable for laminating dry and snack goods packaging and enhancing shear strength in pressure-sensitive adhesive formulations for olefinic films, paper, and paperboard.

Rovene 8305 is a high gel content, non-carboxylated styrene-butadiene emulsion recommended for flooring adhesives. These adhesives can be formulated to require exceptional uncured shear strength, pH tolerance and water resistance. Rovene 8305 can be greatly extened with oils and fillers in high solids formulations. Compatibility with commerical tackifier resins is excellent, as is filler tolerance. Dry films offer excellent water resistance, adhesion and high shear strength.

Rovene 6005 is a very soft acrylic, high molecular weight latex emulsion specifically designed for formulation of pressure sensitive permanent label adhesives. Its high molecular weight allows the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. Rovene 6005 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 6005’s high molecular weight also provides improved wet crock of inks printed on nonwoven and textile substrates in the Printing and Packaging market.

Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives. This polymer emulsion allows for the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. However, it provides good tack on its own, thus minimizing the amount of tackifer required. Rovene 4423 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 4423 can also be blended with natural latex for high shear tape adhesives and for use in special contact adhesive applications.

Rovene 4848 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications. Rovene 4848 has fast break characteristics that may allow it to be used in specially formulated one part spray adhesives. Rovene 4848 has found applications in two part foam-to-foam, one and two part fast breaking spray up adhesives, and special contact or cold seal applications in combination with polychloroprene and natural latex. When working with Rovene 4848 it is important to remember that it may be tackified, thickened and blended with other non-carboxylated and carboxylated emulsions. This flexibility allows for the formulating of a wide variety of adhesives with custom performance properties.