Products in Adhesives & Sealants: Ethylene Vinyl Acetate (EVA)

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane, characterized by two symmetric silicone atoms. It functions as an adhesion promoter between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). In addition to its role as a surface modifier, Dynasylan® 1122 can be employed for the chemical modification of various substances.

Dynasylan® VPS 7163 is an exceptional silane solution offered by Evonik, specifically designed for use in 1K/2K polyurethanes, including reactive hot melt adhesives. This innovative product serves as a valuable tool for formulators, addressing the issue of inadequate adhesion on specific metals and challenging polymer substrates. With Dynasylan® VPS 7163, the need for a primer can be eliminated, providing an efficient solution to enhance bonding performance.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

Dynasylan® AMMO is a bifunctional organosilane, presents a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. Its dual reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Functioning as an adhesion promoter and surface modifier, Dynasylan® AMMO is a clear, colorless liquid with an amine-like odor. It shows solubility in alcohols and aliphatic and aromatic hydrocarbons.

Dynasylan® 6498 is a concentrate of vinyl silane (oligomeric siloxane) containing vinyl and ethoxy groups. This low-viscosity liquid, nearly odorless and colorless, serves as a superb compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

Dynasylan® 1124 is a secondary aminofunctional methoxysilane with symmetric silicon atoms, serves as an adhesion promoter between inorganic materials (like glass, metals, fillers) and organic polymers (thermosets, thermoplastics, elastomers). This versatile compound also functions as a surface modifier and enables chemical substance modification. Available as a colorless to yellow liquid with an amine-like odor, Dynasylan® 1124 readily dissolves in alcohols, aliphatic, or aromatic hydrocarbons.

Dynasylan® AMEO is a bifunctional silane, encompassing a reactive primary amino group and hydrolyzable ethoxysilyl groups. Its dual reactivity enables Dynasylan® AMEO to establish chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It serves as an adhesion promoter, crosslinker, and surface modifier.

Dynasylan® HYDROSIL 2926 is a versatile organosilane solution designed to enhance various applications. This water-based product acts as a surface modifier, crosslinking agent, and adhesion promoter. It effectively works with polymers like Polyethylenes (PE), Polypropylenes (PP), Epoxies (EP), and more. Meeting regulatory standards such as REACH Exempt, this liquid solution is available in cans and drums. Trust in its high performance and compatibility for improved results.

Dynasylan® DAMO-T is a bifunctional organosilane, equipped with two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. With this dual reactivity, Dynasylan® DAMO-T can establish chemical bonds with both inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This makes it an effective adhesion promoter and surface modifier.

Dynasylan® HYDROSIL 1151 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1151 takes your materials to the next level.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

Dynasylan® 1189 is a bifunctional silane, boasts a reactive secondary amine and hydrolyzable methoxysilyl groups. Its dual reactivity enables chemical binding to both inorganic materials (such as glass, metals, fillers) and organic polymers (like thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, surface modifier, and catalyst for substance modification, Dynasylan® 1189 contributes to versatile applications.

Dynasylan® DAMO is a versatile diamino-functional silane that enhances adhesion and modifies surfaces. Acting as an adhesion promoter and surface modifier, it bridges the gap between inorganic materials and organic polymers like polyamides, PBT, PVC, and more. This silane boasts features like corrosion resistance, good impact strength, and improved mechanical properties. It's your solution for cables, pipes, and beyond. Elevate your materials with Dynasylan® DAMO.

Dynasylan® 6490 is a concentrate of vinyl silane (oligomeric siloxane) containing both vinyl and methoxy groups. This nearly odorless, colorless, low-viscosity liquid acts as an excellent compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

Dynasylan® HYDROSIL 1153 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1153 takes your materials to the next level.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Texipol® 63-510 is an inverse emulsion thickener renowned for imparting a short flow to a wide array of aqueous and non-aqueous compositions, effective across a pH range of 1-14. Supplied as a user-friendly, low viscosity liquid, it offers almost instantaneous thickening upon direct mixing into the composition. Its polymer, already in solution as the sodium salt, eliminates the need for additional additives to promote thickening, such as alkali or surfactant.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

PMB200RGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

PUREsorb 783 is a synergistic blend of PUREsorb 622 and PUREsorb 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. PUREsorb 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. PUREsorb 783 is also the product of choice for thick sections where indirect food contact approval is required.

PMB200BGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.