Products in Adhesives & Sealants: Styrene Butadiene Rubber (SBR)

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

TEGO® Antifoam 2291 is a silicone-free, self-emulsifying antifoam concentrate without any silica. This APEO-free organic antifoam is designed for use as an anti-foaming agent in waterborne adhesive formulations, aligning with eco-friendly labeling claims. Categorized under CASE ingredients within foam control additives.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Bis(trimethoxysilylpropyl)amine. Clear to yellowish transparent liquid appearance. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Diamino-functional silane that provides superior elongation, flexibility, and spreading at the interface as a coupling agent. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Aminopropyltriethoxysilane. Maximizes the physical and electrical properties thermoset and thermoplastic composites. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Coupling agent for foundry resins. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Triamino-functional propyltrimethoxysilane. Used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.