Products in Adhesives & Sealants: Styrene Butadiene Styrene (SBS)

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Novotrade Invest AS HCR-105V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

Deqing Jiyuan Synthetic Resin MP-955 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

HIGREE™ HB1410 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It could be used for SIS , NR , SBS basis PSA ,and also owns good compatibility with EVA , APAO etc .It is suggested as tackifier for high quality hotmelt and hotmelt pressure sensitive adhesives.

Pine Rosins PR 097.43 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Foreverest Resources Glyceryl Rosinate (Industrial) G1004 is a Glycerol Ester of Gum Rosin, Ester Gum, GEGR. The Industry grade of Glyceryl Rosinate (a polyol ester of rosin), also called Glycerol Ester of Gum Rosin (GEGR), which is used for specialty industries of adhesives,coating and paints. It is also widely used in polymers including EVA, acrylics, polyurethanes, SIS and SBS.

Bitoner Resin TR-100 include C5 modified C9 resin and C9 modified C5 resin.

Novotrade Invest AS HCR-135V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

Megawide Petrochemicals C5 Hydrocarbon Resin MA 95 is specially suitable for hot melt pressure sensitive adhesive (such as all kinds of packing tape, labels, double-sided adhesive tape, protection tape, hygiene supplies, etc.), hot melt adhesive (such as express plastic packaging, book binding glue, glue wood processing, a variety of stick, etc.).

Novotrade Invest AS HCR-125AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Pine Rosins PR 510.3 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Novotrade Invest AS HCR-115A is a solid polymer with fractional composition up to 3 mm.It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It also has a good adhesive properties, tackifying characteristics and heat stability.

Bitoner Resin TR-120 include C5 modified C9 resin and C9 modified C5 resin.

PT. NASCO GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color.

West Tech Chemical Ltd WR 1095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

TERGUM 120 is a stabilized pentaerythritol esterified rosin in flakes.

Novotrade Invest AS HCR-115AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

SIZEX 101 (ESTERGUM) is a high quality ester gum manufactured out of Gum rosins and Glycerin.

Pine Rosins PR 097.1 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

C5 Petroleum Resin XD-1001J is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

HT9100 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9100 is a transparent granular solid with the color of yellow to light brown. HT9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Fushun Huaxing Petroleum Chemical HX-1690A is C5 aliphatic hydrocarbon resin based on purified piperylene. HX1690A hydrocarbon resin is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers.It owns good balance of tack and cohesive properties ,excellent heat stability and wild compatibility.This grade is especially for EVA hot melt adhesive and SIS, SBS based pressure sensitive adhesive.