Products in Adhesives & Sealants: Styrene Isoprene Styrene (SIS)

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

UVISTOP UV-HM is a synergistic blend of light stabilizers (HALS) and UV absorbers (benzotriazole class) in powder form.

West Tech Chemical Ltd WR 5095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

Henan Anglxxon Chemical Styrene Modified C5 resin ALX-2185 is thermoplastic hydrocarbon resin , it is use styrene modified c5 resin , it has low molecular weight , light color and ,low odor , good compatibility with SIS,EVA , NR AND BR ,good aging stability.

TERGUM 100 is a stabilized pentaerythritol esterified rosin in flakes.

Deqing Jiyuan Synthetic Resin MP-100L Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

Bitoner Resin BT-2104 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

UVISTOP TRM 1 is a synergistic blend of light stabilizers in powder form.

Winlex 4115 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

Bitoner Resin BT-1115 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Pine Rosins PR 097.2 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

Petroleum Resin C5 TC-100 is Used in Hot melt adhesives,pressure-sensitive adhesive, rubber.

HIGREE™ HB1300 is thermoplastic, low molecular weight and narrow molecular weight distribution, slightly yellow C5 resin with slightly C9 modified. It is characterized by its excellent compability with SBS,EVA and SIS ,and is suggested as tackifying resin for high quality hotmelt and hotmelt pressure sensitive adhesives.

Pine Rosins PR 097.1 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Puyang United Chemical C5 Petroleum Resin O-1310 is 100% C5 Aliphatic hydrocarbon resin with key feature of lower softening point and narrow molecular weight distribution which brings PSA excellent wetting and tack property. The major usages of O‐1310 are tackify a variety of adhesive polymers including SIS, EVA, natural rubber, synthetic polyisoprene, polyisobutylene, butyl rubber, AO and APAO.

SIZEX 101 (ESTERGUM) is a high quality ester gum manufactured out of Gum rosins and Glycerin.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

Deqing Jiyuan Synthetic Resin MP-955 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

HIGREE™ HB1410 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It could be used for SIS , NR , SBS basis PSA ,and also owns good compatibility with EVA , APAO etc .It is suggested as tackifier for high quality hotmelt and hotmelt pressure sensitive adhesives.

Fushun Huaxing Petroleum Chemical HX-9100 is C5 aliphatic hydrocarbon resin based on purified piperylene. HX9100 hydrocarbon resin premium aliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers including EVA, APP, APAO, natural rubber, synthetic polyisoprene, polyisobutylene, SIS block copolymers and Butyl rubber. It could be used for EVA hot melt adhesives, hot melt PSA and other adhesives products.