Products in Adhesives & Sealants: Radiation Curable Adhesive

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

VISIOMER® BDGMA (butyl diglycol methacrylate) is a monofunctional and label-free methacrylate monomer that contains ether functionality. It possesses a very low glass transition temperature (Tg), making it an excellent plasticizing monomer. This compound is utilized in the formulation of polymers, copolymers, and light-curing systems. Industries such as adhesives and sealants, coatings, and construction benefit from the versatile properties of VISIOMER® BDGMA.

VISIOMER® HEMATMDI (diurethane dimethacrylate) is a difunctional methacrylate monomer featuring a urethane group. It is characterized by its low volatility and high reactivity. This compound finds extensive use in radiation curing formulations for varnishes, inks, adhesives, as well as dental compounds. Industries such as 3D printing, adhesives and sealants, coatings, personal care, and healthcare benefit from its versatile properties.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

Omnicat BL-550 is a liquid photoinitiator blend, based on Omnicat 550 (20%), Propylene Carbonate (25%) and cycloaliphatic epoxy (55%).

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

Omnipol ASA is a liquid polymeric amine synergist specifically designed for use in inks requiring low migration and low volatility. It is particularly suited to use in combination with low migration Type II photoinitiators as Omnipol BP and TX.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

Photomer® 4061 (TPGDA) is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are flexible, hard and glossy. Photomer® 4061 exhibits good solvency and viscosity reducing characteristics with typical radiation curable oligomers and prepolymers.

MPD Industries UVP 0600 99 is a difunctional Bisphenol A epoxy acrylate. This product is characterized by its light color and high reactivity.It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

Spectra Group Limited H-Nu 780 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 650 nm to 810 nm (λmax = 791nm in DMSO).

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

PL-7011 exhibits excellent flexibility upon curing. It is a non-yellowing extended urethane dimethacrylate and can be used in formulations to add toughness.

PL-7013 has a relatively low viscosity but upon curing exhibits high conversion and low shrinkage. It exhibits excellent flexibility once cured. PL-7013 is very low color.

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Spectra Group Limited H-Nu 815 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 690 nm to 850 nm (λmax = 828nm in DMSO).

Omnirad MBF is a highly efficient, liquid, Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It forms free radicals through an intramolecular hydrogen abstraction process. The use of amines is not recommended as this may lead to efficiency decrease, stability upon storage issues or stronger odor. It can be used in combination with mono or multi functional monomers as reactive diluents

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

PL-7003 is a low viscosity urethane that exhibits very fast cure speeds. Upon curing, PL-7003 exhibits excellent hardness and very low color. PL-7003 can be used in formulations to add strength.

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

UVP 0101 99 is a clear liquid with low viscosity and good solvency.

Komo Chemical KF454S resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

Omnipol 910 is a polymeric Type I photoinitiator, based on piperazino based compounds of the aminoalkylphenone photoinitiator class. The low level of photolysis product migration and low odor, make the product suitable for use in demanding applications such as food packaging inks. The strong UV Chromophore in the UV-B region makes the Omnipol 910 particularly useful in pigmented printing inks.

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

PL-7210 has a unique combination of high tensile strength and good elongation, which results in excellent toughness upon curing. PL-7210 is also very low color.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.