Products in Adhesives & Sealants: Epoxy Coating

Cardolite® NX - 5454 is a low viscosity, solvent and benzyl alcohol-free phenalkamine curing agent designed for epoxy coatings. It offers rapid cure properties, excellent chemical resistance, adhesion on various surfaces, and outstanding water resistance and corrosion protection.

Cardolite® Ultra LITE 513 is a very light-colored, low-viscosity, monofunctional epoxy reactive diluent designed for coatings, adhesives, and other epoxy applications. The long hydrophobic aliphatic side chain of cardanol gives this product a very low viscosity and provides excellent water resistance, flexibility, and thermal shock resistance. High-viscosity solvent or solvent-free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product.

Glowtox BLK 60 is a dark gray and is a pure rutile form. It has excellent stability, makes it ideal for use in high temperature applications. It can replace white TiO2 in darker shades and is recommended for use in variety of liquid epoxy coatings, sealants, underbody coating etc.

AL 160 is a bifunctional organosilane with a reactive epoxide and inorganic methoxysilyl groups that promote adhesion by the ability to chemically bind to inorganic materials and organic polymers.

Glowtox DX is a high-quality cost-effective body-color rutile TiO2 acting as a multitasking ingredient for a formulation developer. It reduces the formulation cost of body cream where a fair degree of TiO2 is incorporated in the formulation.

DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.

Defoamer for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

ExBar® 200 is manufactured from a buff-colored barium sulfate ore. Strict quality control results in consistent products that are used in friction materials, primers, acoustical compounds, rubber compounds, adhesives, sealants and many other applications.

Finomide 1140 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

Springfield Industries SP-612A is an epoxy flexibilizer formulation used toadd flexibility and impact resistance to epoxyadhesives and coatings. It is bisphenol A epoxy basedwith a polysulfide flexibilizing component andproduces a transparent coating when used with anappropriate curing agent.

Pacer Minerals Potassium Feldspar is a potassium feldspar has been the choice of potters, industrial glass & whiteware manufacturers due to its high alkali content and low iron oxides that promote better viscosity during firing & superior whiteness.

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

Alteo SH80 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Replacol® 260 is alkyl phenol formaldehyde resins.

NYACOL AP50 flame retardant additive is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a liquid, high molecular weight, tertiary amine. The oxide particles are nearly 1/50 the size of powdered antimony trioxide. Non-Aqueous Dispersions of Colloidal Antimony Pentoxide Flame Retardant Additives.

Drolite™ 9043 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

INHIBISPHERES® ZB is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZB is porous silica particles containing encapsulated corrosion inhibitors. Low levels of INHIBISPHERES® ZB give superior performance when compared to a traditional corrosion inhibitor on steel.

Shandong Huijin Chemical T-61 is cardanol replace or part replace phenol, via mann nice reaction, modified EDA to create epoxy curing agent.

WSCM-5110 has monofunctional reactive epoxy diluent, low viscosity, can improve toughness and water resistance, used in high solids or solvent-free systems.

Prolink PLR 23 ProLink Pacific Resin is a high performance, durable system with excellent resistance to yellowing caused by UV degradation. This system can be used as a substitute for any standard epoxy system. The system will cure at ambient temperature, but for use in thin films, allow the mixed system to sit until approximately 90°F before being spread thin. Curing at elevated temperatures or allowing long post-cures could also be used to achieve adequate working time.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

SB-432 ATH developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part.

Alteo LVSH3 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Drolite™ 9040 is a phenalkamine used as a curing agent for various epoxy resins. Specially for marine coatings and other Industrial applications.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

Shandong Huijin Chemical 651(400) polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

MicroDyne™ 180 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Shandong Huijin Chemical T-62 is cardanol replace or part replace phenol, via mann nice reaction, modified EDA to create epoxy curing agent.

EkaSol™ 1 is a VOC compliant, low toxicity solvent that is an efficient and cost effective replacement for Methyl Ethyl Ketone (MEK).

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

Super SAP® CCR/CCS is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Drolite™ 9041 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

JINGYI BK-883B has a strong thickening ability, good compatibility, need polar activator. Applicable to low, middle and high polar solvent systems especially suit for 200# solvent, coal tar, arene, etc. it is also used in paints, printing inks, sealants, lubricating greases, putty, mixed paints, bitumen paints, chlorinated rubber paints, epoxy paints, anticorrosion paints, container paints, etc. The international countertype of BK-883B is Bentone-52.

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.