Products in Adhesives & Sealants: Curing Agent

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

Cardolite® NX - 8101 is an epoxy curing agent based on modified CNSL waterborne technology, recommended for epoxy primers and self-levelers for concrete floors.

Cardolite® NX - 5454 is a low viscosity, solvent and benzyl alcohol-free phenalkamine curing agent designed for epoxy coatings. It offers rapid cure properties, excellent chemical resistance, adhesion on various surfaces, and outstanding water resistance and corrosion protection.

Cardolite® NX - 2003D offers fast cure, good adhesion, high surface tolerance, and high chemical resistance.

POLYTHICK SC-75 is a curing agent in a two-component type pressure-sensitive adhesive suitable for use in the production of paper, synthetic paper, polyester film self-adhesive labels and double-sided adhesive tapes. This product is applicable particularly to paper and synthetic paper labels used for frozen foods, due to its high adhesive strength and excellent tackiness even on wet surfaces and at low temperatures.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

PEL-CAT™ CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the opening of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

DYTEK® HMD (hexamethylene diamine) is a highly pure (>99.9%) aliphatic diamine. DYTEK® HMD is used in the production of Nylon polymers, isocyanates, polyamide resins and adhesives. Other applications include water treatment, UV stabilizers, scale and corrosion inhibitors, and petroleum additives. This product is available as an anhydrous that is solid at room temperature and can be shipped as a warm liquid or diluted aqueous solution.

BlueSky Chemical D-35 Crosslinking Agent is clear and yellowish or colorless liquid with a typical smell (MEKO). The product very rapidly hydrolyzes upon contact with moisture.

WSCM-1127 has light color, low viscosity, fast curing, good fluidity, good color retention, add benzyl alcohol.

LAPOX® AH-440 is a modified cycloaliphatic amine available in form of low viscous transparent liquid. It is suitable to cure epoxy resins at ambient temperature. It is recommended for solvent free coating, floor topping, and industrial maintenance coatings along with modified or unmodified epoxy resins based on Bisphenol-A|F. Appropriately cured mass will provide excellent glossy films coupled with good mechanical strength and chemical resistance properties.

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.

Curamine 30-509 is a conventional amido-amine with medium imidazoline content and moderate reactivity.

Curamine 30-100 is a standard semi-solid polyamide with maximum flexibility. [Solution grades available to ease handling].

CURING AGENT W 18 is a bi-functional aziridine crosslinker diluted in dipropylene glycol methylether.

Kumho P&B Chemicals KCA 2330 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Drolite™ 9042 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

Shepherd Technologies Activated Manganese Dioxide − Type 7 is a economical curing agent with ideal use in architectural and insulating glass applications.

Finomide 1125 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

LAPOX® AH-313 is a light-yellow aliphatic polyamine hardener suitable to cure epoxy resin at ambient temperature. When cured with epoxy resin it provides short pot life and faster cure speed. Due to very low viscosity and low dosage, it finds suitable for applications like adhesive, mortar and casting of small electrical components.

Kumho P&B Chemicals KCA 2400 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Curamine 30-260 BX60 is a modified polyamide solution with improved cure under adverse conditions.

AFEX™ LN23C is a base drying Oil called as Linseed having two conjugated double bonds.

CURING AGENT PZ-28 is polyfunctional aziridine (PI based), employed as crosslinking agent and adhesion promoter. It is a clear, amber liquid, miscible in water and many common organic solvents.

CURING AGENT D is a diisocyanate in solution, designed to cross-link polyols (polyethers and polyesters), polyurethanes and elastomers (natural rubber, chloroprene, etc.).

EPOTUF® 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF® epoxy resins.

LAPOX® AH-348 is a liquid, colorless aliphatic polyamine suitable to cure epoxy resins at room temperature. Epoxy resin cured with this hardener is capable to provide good resistance to aliphatic and aromatic hydrocarbon solvents and mild alkali solutions.

AFEX™ SB30C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

AFEX™ LN20C is a base drying Oil called as Linseed having two conjugated double bonds.

Curamine 30-510 is a conventional amido-amine with medium imidazoline content and moderate reactivity.