Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde Software Solutions
Formulations
Food & Nutrition
Food & Nutrition Formulations
Cosmetics & Personal Care
Industries
Agriculture & Feed
Agriculture & Feed
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Cleaning Ingredients
Plastics & Packaging
CASE Ingredients
Products
Agrochemicals
Agrochemicals
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Adhesives & Sealants
Cosmetic Ingredients
Food Ingredients
CASE
Plastics
Pharmaceuticals & Nutraceuticals
Knowde Software Solutions
Filters
Clear
Show products with
Fast Response Times
With SDS
With TDS
Knowde
Automotive & Transportation
Automotive
Safety Systems
Products in Safety Systems
271 Products found in Safety Systems
Filters
Product Families
Suppliers
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
SABIC's Specialties Business
FLEX NORYL™ Resin WCV063
Polymer Name:
PPE/TPE Alloy
Processing Methods:
Wire Coating Extrusion, Extrusion
Density:
1030.0 - 1030.0 kg/m³
Flexural Modulus:
790.0 - 790.0 MPa
SABIC's Specialties Business FLEX NORYL WCV063 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and carries UL VW-1 and UL94 V0 ratings along with a Shore D Hardness reading of 63. FLEX NORYL WCV063 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra thin-wall capability, Good scratch abrasion and pinch resistance, High dimensional stability, low shrinkage and warpage, Very low water absorption, chemical resistance, and good dieletrcic strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
AdvanSix
Aegis® H100NP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Film Extrusion, Thermoforming, Extrusion, Cast Film Extrusion, Blown Film Extrusion
Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® H95ZI
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Profile Extrusion, Extrusion, Compounding
Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd
AdvanSix
Aegis® H100ZP
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Film Extrusion, Thermoforming, Extrusion, Cast Film Extrusion, Blown Film Extrusion
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® CEP-250 Natural
Polymer Name:
Polypropylene Copolymer Alloy
Processing Methods:
Injection Molding
Density::
900.0 - 900.0 kg/m³
Flexural Modulus::
1000.0 - 1000.0 MPa
Noblen® CEP-250 Natural is a high performance polypropylene copolymer alloy. It is used in parts requiring excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: Good stiffness with impact performance and high Melt flow Benefits: Easy to fill large parts
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® AGM 350 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Melt Flow Index::
34.0 - 34.0 g/10 min
Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: High Melt Flow Benefits: Easy moldability with low pressure. Consistently easy to color Quick cycle time
Envalior
Akulon® Ultraflow K-FPG8
Polymer Name:
Polyamide 6 (PA 6)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
Akulon® Ultraflow K-FPG8 is a high-performance polyamide 6 and polyamide 66 material trusted globally for applications in automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive blend of design simplicity and processing ease, along with exceptional mechanical properties across a wide temperature range and diverse conditions. For extrusion, it establishes industry benchmarks, featuring remarkable strength, resilience, and ease of processing. Injection molding is the preferred method, and notable features encompass glass reinforcement and high flow characteristics.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT547
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Chutes, Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Espolex® WT547 is a thermoplastic elastomer with great processing, resulting in low cycle times. It exhibits excellent low temperature ductility and weldability. It is used for various applications such as airbag covers, airbag chutes, interior trim, and injection molded parts. This product is suitable for Injection molding. Applications: Airbag Covers Airbag Chutes Interior Trim Handle Grips Features: Excellent weldability to TPO and PP substrates Excellent low temperature ductility Benefits: Lower cycle times with easy processing
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® CHN-250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Fillers Included:
Talc
Melt Flow Index::
25.0 - 25.0 g/10 min
Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding. Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle Features: Good stiffness with impact performance and high Melt flow Benefits: Easy to fill large parts
Envalior
Stanyl® TW341-B
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-B is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT532A-1
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Tear Strength::
80.0 - 80.0 kN/m
Espolex® WT532A-1 is a thermoplastic elastomer with superior surface appearance, processability, and excellent low temperature ductility. It is used for various applications such as air bag covers, mic and painted applications, interior trim, and injection molded parts. This product is suitable for Injection Molding. Applications: Airbag Covers Molded-in-Color and/or painted applications Interior Trim Injection molded parts Features: Superior surface appearance and processability Excellent low-temperature ductility Benefits: Versatile product with a great appearance
Envalior
Arnite® AV2 370 /B
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 370 /B is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT461A
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Tear Strength::
85.0 - 85.0 kN/m
Espolex® WT461A is a thermoplastic elastomer with high melt flow and great processing. It exhibits excellent low temperature ductility. It is used for various applications such as air bag covers, interior trim, and injection molded parts. This product is suitable for Injection Molding. Applications: Air Bag Covers Interior Trim Features: Excellent Low-temperature ductility Excellent appearance with flow across the tear seam Benefits: High Melt flow Easy moldability
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT546
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Chutes, Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Espolex® WT546 is a thermoplastic elastomer with excellent appearance for microscopic applications, great processing resulting in low cycle times, excellent low temperature ductility, and excellent weldability. It is used for various applications such as airbag covers, airbag chutes, interior trim, and injection molded parts. This product is suitable for Injection molding. Applications: Airbag Covers Airbag Chutes Interior Trim Handle Grips Features: Excellent weldability to TPO and PP substrates Excellent low temperature ductility Benefits: Lower cycle times with easy processing
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® UT412A
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
880.0 - 880.0 kg/m³
Tear Strength::
84.0 - 84.0 kN/m
Espolex® UT412A is a thermoplastic elastomer with excellent low-temperature ductility. It is used for various applications such as air bag covers, interior trim, and injection molded parts. This product is suitable for Injection Molding. Applications: Air bag covers interior trim Injection molded parts needing flexibility Grip handle Features: Excellent low-temperature ductility Benefits: Easy moldability with low pressure. Consistently easy to color Quick cycle time
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Noblen® AGM 250 Natural
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Injection Molding
Melt Flow Index::
20.0 - 20.0 g/10 min
Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle Features: -20 ⁰C Temperature Ductility Good Scratch Resistance Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color
Envalior
Arnite® AV2 365 SN
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 365 SN is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Envalior
Akulon® K224-PG8
Polymer Name:
Polyamide 6 (PA 6)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
Akulon® K224-PG8 is a polyamide 6 (PA 6) resin utilized in composite materials and plastics, featuring impact modification and lightweight properties. It is applied in various sectors, including consumer goods (appliances and electronics, furniture), automotive, and transportation (chassis, brakes, exterior, interior, safety systems, seating).
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT1020
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
Light Weight, Pigmentable, Soft Touch, Cost Effective, High Stiffness, Good Colorability, Low Density, Consistent High Quality
Density::
1030.0 - 1030.0 kg/m³
Flexural Modulus::
2800.0 - 2800.0 MPa
Espolex® WT1020 is a 20% glass filled, Thermoplastic Elastomer for injection molding. It has the soft touch feeling, low gloss, good impact, high stiffness and good scratch resistance. Applications: Automotive Interior Trim Door handles Flocked Bin Soft touch application Boat Jet-Propelled Vehicle Injection Molded Parts Features: Excellent haptics Low gloss Good scratch resistance Benefits: Rigid and Soft touch feeling
Envalior
Arnitel® EM631-HB
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Extrusion
End Uses:
Truck Air Brake Tubes
Density:
1230.0 - 1230.0 kg/m³
Strain at Break:
50.0 - 50.0 %
Arnitel® EM631-HB is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries spanning from automotive to E&E, it is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material can be processed using extrusion technology and includes heat stabilization for enhanced performance.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT564
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Espolex® WT564 is a thermoplastic elastomer with great processing, resulting in low cycle times and good low-temperature ductility. It is used for various applications such as air bag covers, painted applications, interior trim, and injection molded parts. This product is suitable for Injection molding. Applications: Airbag Covers Airbag Chutes Interior Trim Handle Grips Features: Excellent weldability to TPO and PP substrates Excellent low temperature ductility Benefits: Lower cycle times with easy processing
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT515
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Tear Strength::
71.0 - 71.0 kN/m
Espolex® WT515 is a thermoplastic elastomer with superior processability and surface appearance and excellent low temperature ductility. It is used for various applications such as air bag covers, MIC and painted applications, interior trim, and injection molded parts. This product is suitable for Injection Molding. Applications: Airbag covers Mold-in-Color and/or pained applications Interior Trim Features: Excellent low-temperature ductility Benefits: Superior processability and surface appearance for any challenging applications
Envalior
Arnitel® CM622
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Pump Parts, Tubing, Cables, Truck Air Brake Tubes, Wires
Density:
1270.0 - 1270.0 kg/m³
Strain at Break:
640.0 - 640.0 %
Flexural Modulus:
270.0 - 270.0 MPa
Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.
Envalior
Stanyl® TW341-FC
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-FC is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Arnitel® EM631
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Belts & Belt Repair, Conveyor Parts
Density:
1240.0 - 1240.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Arnitel® EM631 is a high-performance thermoplastic copolyester (TPC) known for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, it is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, resulting in reduced environmental impact and lower system costs. This material can be processed using both extrusion and injection molding technologies.
Envalior
Arnite® AV2 360 S
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 360 S is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT1025
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
Soft Touch, Cost Effective, High Stiffness, Good Colorability, Low Density, Consistent High Quality, Light Weight, Pigmentable
Density::
1070.0 - 1070.0 kg/m³
Flexural Modulus::
3150.0 - 3150.0 MPa
Espolex® WT1025 is a 25% glass filled, Thermoplastic Elastomer for injection molding. It has the soft touch feeling, low gloss, good impact, high stiffness and good scratch resistance. Applications: Automotive Interior Door handles Flocked bin Soft touch application Boat Jet-Propelled vehicle Injection molded parts Features: Excellent haptics Low gloss Good scratch resistance Benefits: Rigid and Soft touch feeling
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT521
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
880.0 - 880.0 kg/m³
Tear Strength::
110.0 - 110.0 kN/m
Espolex® WT521 is a thermoplastic elastomer with strong weld-line strength and great value. It is used for air bag covers, interior trim, and injection molded parts. This product is suitable for Injection Molding. Applications: Air Bag Covers Interior Trim Features: Strong weld/knit line strength Benefits: Great value and performance balance.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT525A
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding, Extrusion
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
880.0 - 880.0 kg/m³
Tear Strength::
80.0 - 80.0 kN/m
Espolex® WT525A is a thermoplastic elastomer with excellent low temperature impact and great value. It is used for various applications such as air bag covers, interior trim, extruded parts, and injection molded parts. This product is suitable for both Injection Molding and Extrusion. Applications: Airbag Covers Extruded parts Injected parts Features: Excellent low-temperature impact with a great value Benefits: Versatile for injection molding and extrusion.
Envalior
Arnite® AV2 370 HF
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 370 HF is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology best suited is injection molding, with special features such as good or high flow.
Envalior
Arnite® AV2 340
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® AV2 340 is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Envalior
Akulon® K224-PG6
Polymer Name:
Polyamide 6 (PA 6)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
Akulon® K224-PG6 is a polyamide 6 (PA 6) resin used in composite materials and plastics. It offers features like impact modification, lightweight properties, and a UL flame rating. It finds applications in consumer goods (appliances and electronics), automotive and transportation (exterior, interior, and safety systems), and more.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT557A
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover
Density::
888.0 - 888.0 kg/m³
Tear Strength::
90.0 - 90.0 kN/m
Espolex® WT557A is a thermoplastic elastomer with superior low-temperature ductility. It is used for various applications such as air bag covers, painted applications, and injection molded parts. This product is suitable for Injection molding. Applications: Airbag Covers Painted applications Interior Trim Handle Grips Features: Superior low-temperature ductility Benefits: High performance from a mechanical property standpoint.
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT570
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Extrusion, Injection Molding
Features:
Cost Effective, Good Colorability, Low Density, Consistent High Quality, Low Temperature Impact Resistance, Light Weight, Pigmentable
Density::
880.0 - 880.0 kg/m³
Strain at Break::
400.0 - 400.0 %
Flexural Modulus::
300.0 - 300.0 MPa
Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures. Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts Features: Excellent impact performance at low temperatures well-balanced mechanical property Benefits: Mold-in-Color Recyclable
Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC
Espolex® WT551
Polymer Name:
Thermoplastic Elastomer (unspecified)
Processing Methods:
Injection Molding
End Uses:
Airbag Cover, Automotive Interior Trim
Density::
890.0 - 890.0 kg/m³
Espolex® WT551 is a thermoplastic elastomer with superior processability and surface appearance and excellent low temperature ductility. It is used for various applications such as air bag covers, mic and painted applications, interior trim, and injection molded parts. This product is suitable for Injection molding. Applications: Airbag Covers Interior Trim Handle Grips Features: Excellent for molded-in-color and/or painted applications. Excellent low temperature ductility Benefits: Great surface appearance no matter how challenging the geometry.
Envalior
Stanyl® TW341-N
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-N is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Show
36
of 271 results
Go to page
1
2
3
4
5
6
7
8