Products in Transmission Fluids

ADOGEN® 172 is a primary oleyl amine sourced from vegetable origins, recognized by its chemical name. It offers specific packaging options, adheres to regulatory standards, falls within a distinct chemical family, and serves important functions within the realm of base chemicals.

Armolube® FM 103 friction modifier is used as an intermediate to make friction modifiers for Dual Clutch Transmission Fluids (DCT), Automatic Transmission Fluids (ATC), and anti-wear components.

ACLUBE P-2100 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

ACLUBE P-4080 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-4080 with mineral oils.

ACLUBE P-2090 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

ACLUBE P-D3000 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high dispersibility.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

ACLUBE P-2320 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-2320 with mineral oils.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

ACLUBE V-1040 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability.

ACLUBE V-4020 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

ACLUBE V-2041 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties.

ACLUBE V-1001 is viscosity index improvers, suitable for ATF, CVTF, gear oils and hydraulic fluids. They exhibit high shear stability, viscosity index improvement and low-temperature viscosity properties.

ACLUBE V-4000 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

ACLUBE V-1050 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1050 with mineral oils.

ACLUBE V-3030 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-3030 with mineral oils.

ACLUBE V-1010 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1010 with mineral oils.

ACLUBE V-5000 is a viscosity index improver, suitable for engine oils and hydraulic fluids. It exhibits high thickening and low-temperature viscosity properties.

ACLUBE V-1060 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1060 with mineral oils.

ACLUBE V-5040 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

ACLUBE V-1040 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability.

ACLUBE V-3020 is a viscosity index improver, suitable for ATF, gear oils and hydraulic fluids. It exhibits high thickening and low-temperature viscosity properties.

ACLUBE V-2000 is a viscosity index improver, suitable for gear oils, ATF, CVTF and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties for base oils.

LUBRICIT DTDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHD is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 9522 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LUBRICIT GTO is a glycerol trioleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.