Products in Automotive & Transportation: Reinforcement

AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

ULTRASIL® VN 3 GR has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 GR offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 GR is widely used in different bonding systems.

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

Cimpact® 610-610C is a high-brightness, high-purity, very platy, very fine talc that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, foamed plastics, and plastic films. It is available in compacted form (Cimpact® 610C) for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® 575C-HB is a white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is in compacted form for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Cimpact® 550-550C is a high-brightness, high-purity, very platy, very fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics. It is available in compacted form (Cimpact® 550C) for maximum extruder throughput, minimum dust, and improved dispersion.

Cimpact® 710-710C is a high-brightness, high-purity, very platy, ultrafine talc with excellent top-size control. This product is recommended for color matching, excellent stiffness, HDT, dimensional stability, impact strength, and esthetics in high-performance plastics, foamed plastics, plastic films, and the nucleation of semi-crystalline plastics. It is available in compacted form (Cimpact® 710C) for maximum extruder throughput, minimum dust, and improved dispersion.

HDK® H2000 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H2000 is primarily used as a reinforcing filler in silicone-elastomers, enhancing their properties. Furthermore, it serves as a free flow additive in the production of technical powders and finds application as an additive in antifoam agents.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

AL 69C is a 50/50 mixture of AL69 with N330 carbon black to form a free flowing granule that is easy to use and at the same time utilize the properties of the AL 69 silane. AL 69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H PA by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is a Dust-free

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

AL PS-33 is an economical rubber reinforcing silica. The combination of high reinforcing, good abrasion resistance and ease of processing make it a good choice for formulators. It enhances the physical and mechanical properties of many rubber compounds.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

AL69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.