Products in Building & Construction: Acrylics & Acrylates

VINNAPAS® eco EP 3360 is an aqueous polymer dispersion based on vinyl acetate and ethylene. This dispersion is formulated without the use of alkyl phenol ethoxylate (APEO)-containing compounds. It offers a high solids content, providing formulation flexibility and supply-chain efficiency. With its very high scrub resistance, it withstands rigorous cleaning without compromising performance. Additionally, it exhibits excellent hiding power, ensuring optimal coverage and a smooth finish.

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

StanChem Polymers SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning.

StanChem Polymers SC 6508 is an acrylic copolymer emulsion designed for exterior latex paints where wet adhesion is needed. Use of SC 6508 imparts improved adhesion to chalky and weathered surfaces.

StanChem Polymers SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine.

StanChem Polymers SC 6016 is self-crosslinking acrylic emulsion when the polymer is cured at temperatures of 300 – 350 °F, depending on the time and temperature of cure. Added acid catalyst can increase the rate of cure.

StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.

VINNEVA® LC 7611 is a high-solid aqueous polymer dispersion based on vinyl acetate and ethylene. This dispersion offers excellent elongation, adhesion, flexibility, and heat-resistant properties, making it suitable for use in various bitumen emulsions. VINNEVA® LC 7611 is compatible with both anionic and cationic bitumen emulsions, as well as with a range of other latexes, modifiers, and other VINNEVA® dispersions.

VINNOL® E 15/48 A is a hydroxyl-containing copolymer composed of approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. It serves as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 7410 E is a hard dispersible polymer powder based on vinyl acetate, ethylene, and acrylic acid ester, providing excellent workability and tensile adhesion strength. It has no effect on rheological properties and is suitable for formulating high-quality, low-emissions flexible tile adhesive that features excellent tensile adhesion strength.

VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNEVA® LC 0300 is an aqueous polymer dispersion with a low glass transition temperature (Tg). It is produced from the monomers vinyl acetate, ethylene, and acrylate. This dispersion offers excellent elongation, adhesion, and flexibility, making it suitable for various bitumen emulsions. VINNEVA® LC 0300 is compatible with most anionic bitumen emulsions and can also be used with other latexes, modifiers, and VINNEVA® dispersions.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.

Alcogum L 265 is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals. It is an acrylate-based emulsion copolymer supplied at 30% active solids in water. This product is part of a unique line of hydrophobically modified, alkali soluble emulsion polymers typically referred to as HASE thickeners.

Alcosperse 492 is a polyacrylate ammonia salt dispersing agent often used in clay dispersant applications.

Alcogum SL 117 is an acrylate-based emulsion copolymer supplied at 30% active solids in water. This product is part of a unique line of hydrophobically modified, alkali soluble emulsion polymers typically referred to as HASE thickeners. The Alcogum SL 117 manufacturing process enables fine control of the polymer structure and molecular weight. This provides provide optimized performance in a broad range of application areas, including: Adhesive and textile compounding Paint formulation Detergent and cleaning compositions Construction compounding Latex coatings Pigment mining Particulate suspension

Alcosperse 602N a liquid acrylate homopolymer. It can be used as a dispersant for a wide range of pigments and fillers in waterborne systems for paint, coatings and printing inks. It is especially effective for dispersing TiO2, CaCO3, and mineral clays in waterborne systems. Benefits  Excellent dispersion of a wide range of pigments and fillers Outstanding hydrolytic stability Compatible with most surfactants Features VOC-free Low molecular weight Incorporates easily into formulations Easy to handle Watermark resistance

Alcosperse 787 is a novel hydrophobically modified acrylic copolymer dispersing agent developed to help formulators create innovative waterborne paints and coatings with excellent performance characteristics over competitive dispersants such as water mark resistance, alkaline and salt resistance, and other related hydrotropic effects. Key Benefits Excellent color acceptance Outstanding pigment dispersing efficiency Strong hydrophobic properties Long shelf life Features Alkali resistance Good storage stability Salt resistance Water mark resistance Water resistance

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Ottopol CS-58 is an anionic acrylic emulsion that is used as a binder for house paints and pigment dispersions.

WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water-based paint, printing ink, or adhesive. It is particularly effective in improving the wet edge or open time of low- and zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. This product will improve the flow, leveling, and appearance of a given paint.

Ottopol 151 is an anionic acrylic emulsion with a low glass transition temperature of -25°C. It showed excellent water resistance after a 4 hour ambient cure of a wet, 25 mil thick film. This product is mainly used for elastomeric roof coatings.

Syntran® PA-1445 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

LIOCRYL XAM 2827 is an aqueous, self-crosslinking pure acrylic emulsion that is solvent- and plasticiser-free. It is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings, especially in combination with appropriate Liopur polyurethane dispersions. It has applications in industrial coatings, wood flooring, wood coatings, and finishes.

LIOCRYL AM 912 is an aqueous, pure acrylic emulsion that is solvent- and plasticiser-free. It is a general-purpose emulsion for the manufacture of matt to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. Unlike old alkyd resin coats, it has excellent adhesion. The glossy paints are characterized by good stability, leveling, resistance to light, and blocking resistance. It has applications in furniture coatings, wood coatings and finishes, industrial coatings, wood flooring, and also in architectural coatings.

SYNTHALAT A-HD 8199 is a polyisocyanate-curing high-solids acrylic resin. It is used as a 2-pack-high solids furniture topcoat with an initial gloss. It has applications in metal coatings, wood flooring, industrial coatings, furniture coatings, wood coatings, and finishes.

LIOCRYL AS 640 is an aqueous hydroxyfunctional acrylic emulsion, solvent- and plasticiser-free. It is suitable for the formulation of fast-drying aqueous 2-pack top coats with high gloss and good chemical resistance. The emulsion requires the addition of coalescents for proper film formation. The emulsion film can have a slightly structured surface. It has applications in metal coatings, automotive OEM coatings, wood flooring, wood coatings, and furnishings.

SYNTHALAT A-TS 4399 is a polyisocyanate crosslinkable high-solid acrylic resin. It is recommended to use it with aliphatic polyisocyanates for 2-pack soft-feeling coatings. Also with other acrylics and aliphatic polyisocyanates as elastifiers for air- and overdrying 2 packs top coats, pigmented and clear with high elasticity, chemical-, petrol-, and weather resistance for vehicle coatings. It has applications in furniture, metal coatings, wood coatings and finishes, furniture coatings, and automotive OEM coatings.

LIOCRYL AM 921 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups. Its fine-particle size and solvent- and plasticiser-free formulation AM it particularly suitable for the formulation of aqueous 1- and 2-pack wood and furniture varnishes. Coatings based on this product show good grain enhancement on wood. It has applications in wood coatings and finishes, wood flooring, furniture and furniture coatings, and industrial coatings.

SYNTHALAT A-TS 1857 is a thermoplastic acrylic resin. This product is recommended as a physically drying sole binder, mainly for plastic and metal substrates with fast drying and good petrol resistance. It has applications in architectural coatings, craft and hobby, metal coatings, automotive OEM coatings, and other consumer goods applications.

SYNTHALAT A 1653 is a polyisocyanate-curing acrylic resin. Used in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-pack high-gloss, high-build polyurethane coatings, particularly suitable for coating furniture. It has applications in industrial coatings, metal coatings, furniture coatings, and other printing, packaging, and paper applications.

LIOCRYL AM 923 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups, a fine particle size, and is solvent- and plasticiser-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood and furniture varnishes. For this, it needs to be combined with Liopur polyurethane dispersions. It is also used wherever high chemical resistance and yellowing resistance are required. It has applications in wood coatings and finishes, furniture, wood flooring, and industrial coatings.

LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups, a fine particle size, and is solvent- and plasticiser-free. This emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. The emulsion can be used wherever high chemical resistance, plasticizer resistance, and non-yellowing properties are required. It has applications in furniture, industrial coatings, wood coatings and finishes, furniture coatings, and also in wood flooring.

SYNTHALAT A 597 is a thermoplastic acrylic resin. It gives good results as the sole binder for the manufacture of primers for problem substrates such as zinc. Unlike other physically dying binders, it does not require the addition of any plasticizers. It has applications in industrial maintenance, architectural coatings, primers and lacquers, and marine coatings.