Products in Building & Construction: Filler

VINNAPAS® 538 ED is a surfactant-stabilized polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, formaldehyde donors, or alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® 538 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 540 ED (ULS) is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® 540 ED (ULS) is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

Casiflux A 7020 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Nicron® 303 is a high-purity microcrystalline talc with more than 98% talc content. The lamellar nature of Nicron 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability.

Mistron® 554 is an off-white, high-purity, platy-fine talc. Its platy nature improves barrier properties, corrosion resistance, and stain blocking ability in architectural and industrial primers. Mistron® 554 is also used in topcoats to reduce hard settling, improve sag resistance, and extend prime pigments.

Silverline 202 is a high purity engineered microcrystalline talc that is recommended whenever low viscosity build pigments are required. Silverline 202 enhances film strength and flexibility and provides barrier properties to improve corrosion resistance. Additionally, Silverline® 202 is a high-efficiency flatting pigment.

Casiflux A 90 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

Casiflux A 38 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Mistron® 604 is a high-purity microcrystalline talc with more than 98% talc content. The lamellar nature of Mistron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability.

Silverline 303 is a high-purity microcrystalline talc product. Silverline 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. This product can be used as a cost-effective reinforcing agent or a dusting/parting agent.

JetWhite 7D is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Casiflux CA 45 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Casiflux G38 is wollastonite (calcium silicate). Due to its structure, the use of wollastonite improves the mechanical properties of the sealant and adhesive. This product helps as a mechanical reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Vertal® 503 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking, and barrier properties to architectural and decorative coatings. Vertal® 503 is especially suited for waterborne paints and primers where a 5-Hegman, low oil-adsorption, platy mineral pigment is required.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Casiflux A 25 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Silverline 403 is an off-white, high-purity, platy, fine talc. It enhances film strength and flexibility, provides barrier properties in architectural and industrial primers, and improves corrosion resistance and stain-blocking ability. Silverline 403 is used in paints to improve low-shear viscosity and maximize prime pigment extension.

Silverline 001 is a high-purity platy talc that is used as a flux for high-alumina ceramics and sanitary ware, and the low calcium content makes it an excellent substrate for cordierite catalyst supports. Silverline 001 is an excellent fluxing and processing additive for brick, clay pipe, roofing, and floor tile manufacture.

Casiflux A 5000 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux M 75 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Mistron® 353 is a high-purity microcrystalline talc. Mistron® 353 is used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron® 353 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Vertal® 202 is a highly lamellar talc/carbonate mineral pigment. Vertal® 202 provides a unique balance of prime pigment spacing (opacity), flatting efficiency, film reinforcement, anti-cracking, and barrier properties for architectural and decorative coatings. Vertal® 202 is recommended for architectural flat latex paints, contractor-grade flat latex paints, and high%PVC applications that require a brighter, 2-hegman, lamellar mineral pigment.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 002 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 002 enhances film strength and flexibility in sealant formulations and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 002 is used in topcoats, block fillers, traffic paints, texture paints, and composite compounds.

Mistron® 403 is a high-purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron® 403 also prevents tannin bleed and improves gloss uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron® 403 enhances film strength and flexibility.

Casiflux M 50050 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum-plaster, and concrete, improving their properties in both the fresh and hardened states. This thixotropic additive was specifically developed to act as an anti-sagging and anti-slipping agent, improving workability and the visual finish of the systems into which it is incorporated.

Cimsil G30 is an attapulgite-based additive specifically developed to modify the rheology of wet and dry joint compounds and adhesives. This rheological additive is fully inert and compatible with most common binders, whether organic or inorganic. It is particularly effective in highly viscous filling pastes, such as joint compound for drywall or plasterboards.

Cimsil A55G is a chloride-free, thixotropic powder additive that is developed to be used in cement and/or lime and gypsum systems. This product is a low-dust additive designed for improving properties in fresh and hardened state of mortars and concrete systems.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.