Products in EIFS & Insulation

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNAPAS® 5047 T is a very flexible dispersible polymer powder with a slight thixotropic effect and very good workability, specifically suited for tile adhesives, troweling compounds, and ETICS. It is based on a copolymer of vinyl acetate and ethylene. VINNAPAS® 5047 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to its non-slump properties, it offers excellent workability.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

VINNAPAS® 5537 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5537 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic characteristics. Besides good non-slump properties and workability, it offers good tensile adhesion strength after water immersion. The product is currently in the process of being introduced into industrial use (scale-up product). The quoted product data is, therefore, subject to change. Before industrial use, availability should be clarified with WACKER POLYMERS.

SITREN® P 750 is a highly effective water repellent that relies on modified silanes and siloxanes supported by an inorganic carrier. This product serves the function of enhancing water repellency and belongs to the product family of finishing additives and treatments within the field of textile and leather chemicals, falling under the broader category of industrial additives and materials technologies.

SULF-N® Ammonium Sulfate - Industrial Grade (21-0-0-24S) is a research-tested and field-proven source of readily-available sulfate sulfur and loss-resistant ammonium nitrogen.

VINNAPAS® 5044 N (KOR) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (KOR) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 547 ED (ULS) is a versatile polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. VINNAPAS® 547 ED (ULS) offers several advantages in a wide range of building chemical and construction applications. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 4023 N (GER) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, ETICS, and self-leveling compounds. It is based on a flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4023 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 4240 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, wall applications, and tile adhesives. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility. VINNAPAS® 4240 N is part of our standard range, offering best-in-class solutions.

VINNAPAS® 5044 N (GER) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 548 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. The dispersion is characterized by high viscosity and good bonding strength due to high Mw PVOH.

SILRES® BS 1801 is a mixture of octyltriethoxysilane isomers, with iso-octyltriethoxysilane as the main component. It is used in its undiluted form as an admixture for the integral waterproofing of fresh concrete. SILRES® BS 1801 is highly recommended as a concrete waterproofing admixture.

VINNAPAS® 4036 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4036 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 4042 H is a medium hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 558 ED is a product with good flexibility and high bonding strength. VINNAPAS® 558 ED is a plasticizer-free dispersion based on vinyl acetate and ethylene. The product is stabilized by a protective colloid. VINNAPAS® 558 ED is produced without the addition of any organic solvent.

VINNAPAS® 529 ED is a versatile, medium-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 4023 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, render and plasters, and skim coat. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4023 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5844 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortar. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5844 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.

VINNAPAS® 5048 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS, renders and plasters, and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 5044 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5043 N is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility. VINNAPAS® 5043 N is part of our standard range, offering the best-in-class solutions.

VINNAPAS® 822 HD is a dispersion with excellent hydrophobic properties combined with very low flammability. VINNAPAS® 822 HD can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. VINNAPAS® 822 HD is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer.

SILRES® BS 30 A is a stable, VOC-compliant blend of 100% active siloxanes and silicone resin. It imparts water and stain repellency to substrates while enhancing their appearance. Developed for treating mineral substrates commonly used in the tile industry, such as tumbled marble, limestone, slate, and saltillo clay tile, SILRES® BS 30 A is currently produced in the USA.

SILRES® BS 1052 is an aqueous and water-dilutable emulsion of a medium-viscosity polydimethylsiloxane. Its main purpose is to provide water repellency to materials such as glass wool (fiberglass) or stone wool. It can be used on both bound materials, where the wool is bound with a resin, as well as unbound materials without a resin. By applying SILRES® BS 1052, it helps to enhance the water-repellent properties of these materials, improving their performance in moisture-related applications.

SILRES® BS 5140 is an aqueous and water-dilutable emulsion of aminofunctional polydimethylsiloxane. It is used to provide water repellency to mineral insulation materials, particularly binder-free mineral wool, also known as blowing wool. Beside the hydrophobation of binder-less mineral wool, so-called "blowing wool, SILRES® BS 5140 can also be used at lower temperatures or for post-treatment of mineral wool.

VINNAPAS® 546 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

VINNAPAS® 540 ED (ULS) is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® 540 ED (ULS) is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

VINNAPAS® 5209 ED is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 5209 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 5044 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortars. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.

SILRES® BS Creme D is an aqueous, solvent-free injection product presented in the form of a silane-based cream. It is specifically designed for the prevention of rising damp by creating a horizontal barrier. It finds application in hydrophobic impregnation, impregnation of new and existing buildings, and masonry damp-proofing.

Deltech Crystal Polystyrene 130 is a homopolymer of styrene, produced through the polymerization of styrene. It is primarily used in the manufacturing of plastic products. This polymer is in a solid physical state and appears clear in color. It is insoluble in water and demonstrates stability. Importantly, there is no occurrence of hazardous polymerization with this product. Furthermore, It is an inert substance with low volatility and is non-biodegradable. It also possesses a low potential for bioaccumulation, making it a more environmentally friendly choice compared to some other materials.

Deltech Crystal Polystyrene 920 is a solid polymerized styrene used as a plastic product. It appears as a clear solid and is insoluble in water. It is considered stable, with no risk of hazardous polymerization. Due to its solid nature, it is expected to have low mobility in the soil. It is also classified as non-biodegradable, indicating that it does not readily break down in the environment.

Deltech Crystal Polystyrene 147 is a homopolymer of styrene, produced through the polymerization of styrene. It is primarily used in the manufacturing of plastic products. This polymer is in a solid physical state and appears clear in color. It is insoluble in water and demonstrates stability. Importantly, there is no occurrence of hazardous polymerization with this product. Furthermore, It is an inert substance with low volatility and is non-biodegradable. It also possesses a low potential for bioaccumulation, making it a more environmentally friendly choice compared to some other materials.