Products in Plasters & Renders

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

VINNAPAS® EP 3362 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers a high solid content, providing formulation flexibility and improving supply-chain efficiency. It exhibits very high scrub resistance and excellent hiding power. Additionally, it features improved high-temperature resistance.

VINNAPAS® EP 3360 (BGH) is an aqueous polymer dispersion that is based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. This dispersion offers a high solid content, allowing for formulation flexibility and improved supply-chain efficiency. It also provides very high scrub resistance, excellent hiding power, and enables the creation of low-odor products.

VINNAPAS® EP 3360 (ULS) is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers a high solid content, providing formulation flexibility and improving supply-chain efficiency. It also exhibits very high scrub resistance and excellent hiding power.

VINNAPAS® eco EP 3360 is an aqueous polymer dispersion based on vinyl acetate and ethylene. This dispersion is formulated without the use of alkyl phenol ethoxylate (APEO)-containing compounds. It offers a high solids content, providing formulation flexibility and supply-chain efficiency. With its very high scrub resistance, it withstands rigorous cleaning without compromising performance. Additionally, it exhibits excellent hiding power, ensuring optimal coverage and a smooth finish.

VINNAPAS® 5012 T is a thixotropic dispersible polymer powder for dry mix technology, specifically suited for tile adhesives, renders and plasters, wall and joint fillers, as well as skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® T, which means it has a thixotropic effect on rheology and provides the basic properties of adhesion and flexibility in addition. VINNAPAS® 5012 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5028 E (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (USA) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 4040 E is a dispersible polymer powder for dry-mix mortars, specifically suited for waterproofing membranes. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 4040 E belongs to the product class VINNAPAS® E, which means that it provides enhanced properties like improved workability and superior mechanical properties (e.g. crack-bridging or tensile-adhesion strength), particularly in formulations with high polymer content and/or low cement content.

VINNAPAS® 8812 T is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall trowelling compounds. It is based on a flexible copolymer of vinylacetate, ethylene, and vinychloride and belongs to the product class VINNAPAS® T which means that it provides good anti-sag properties and excellent adhesion after water immersion, giving a high degree of formulation freedom. VINNAPAS® 8812 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 4020 N is a dispersible copolymer powder composed of vinyl acetate and ethylene that can be easily dissolved in water. It offers a semi-flexible polymer with no impact on rheology and possesses outstanding general-purpose properties. When VINNAPAS® 4020 N is incorporated into compounds, it enhances adhesion, flexural strength, deformability, and abrasion resistance while maintaining excellent handling characteristics. Moreover, it does not significantly affect leveling, thixotropy, or water retention. This makes VINNAPAS® 4020 N an ideal choice for blending with mortar additives that aim to impart specific properties.

SILRES® Powder A is a highly efficient silicone water-repellent additive available in powder form. It is suitable for use in both dry powder and liquid systems. This makes it versatile for manufacturing various products, including those based on earth-moist or slurry formulations.

SILRES® BS Powder G is a water repellent in powder form for gypsum and construction material mixes containing gypsum. It must be thoroughly mixed with the gypsum before water is added. Good water repellency is obtained by adding 0.5 to 2.0% by weight of powder, based on the dry weight of the gypsum. The exact amount depends on the type of gypsum and the quantity of mixing water.

VINNAPAS® 5010 N (GER) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, and trowelling compounds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

VINNAPAS® 7034 E is a dispersible polymer powder for dry mix mortars, specifically suited for renders, plasters, and concrete repair. It is based on a flexible terpolymer of vinyl acetate, ethylene, and vinyl ester. VINNAPAS® 7034 E belongs to the product class VINNAPAS® E, which means that it provides enhanced properties like improved workability, adhesion, or water resistance, to name just a few.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

VINNAPAS® 5010 N (KOR) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters, and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (KOR) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 240 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a flexible copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

SILRES® Powder E is a powder-form water-repellent additive based on silane technology. It is highly efficient and offers exceptional water repellency even at low concentrations, while maintaining water vapor permeability. SILRES® Powder E is a high-quality specialty product specifically designed to enhance the water repellency and water resistance of non-load-bearing precast concrete products or mineral construction material mixes. It can be used in various applications, such as premixed plasters, joint mortars, and powder paints.

VINNAPAS® 5518 H is a strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts and renders. It is based on a hard copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in combination with increased mechanical strength.

VINNAPAS® 4023 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, render and plasters, and skim coat. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4023 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® eco 7220 E is a versatile dispersible polymer powder designed for dry mix mortars, with a specific focus on tile adhesives and tile grouts. This product is based on a flexible copolymer of vinyl acetate, ethylene, and methyl methacrylate, belonging to the VINNAPAS® E product class. As a member of this class, it offers enhanced properties such as excellent adhesion even after water immersion and flexibility.

VINNAPAS® 8034 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders, plasters, and skim coats. It is based on a flexible terpolymer of vinyl chloride, ethylene, and vinyl laurate. VINNAPAS® 8034 H belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to adhesion properties.

VINNAPAS® 4042 H is a medium hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 5048 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS, renders and plasters, and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 5010 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters, and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 5005 N is a dispersible polymer powder for dry mix mortars, specifically suited for cost-efficient cementitious tile adhesives, wall fillers, and joint fillers. It is based on a very hard VA/E copolymer and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology. VINNAPAS® 5005 N provides good adhesion strength very efficiently in tile adhesive at low polymer dosages.

SILRES® BS 2001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. It is a ready-to-use solution that serves as a high-quality water repellent for impregnating and priming mineral surfaces. After application, the emulsion undergoes hydrolysis, releasing alcohol and converting into a silicone resin.

SILRES® BS Creme F is an aqueous, solvent-based, creamy hydrophobic impregnating agent based on a mixture of silane and siloxane. It is a high-quality specialty product recommended for the hydrophobic impregnation of natural mineral substrates such as brick, limesandstone, and sandstone. When applied correctly, it effectively reduces water uptake, provides deep penetration, and produces a desirable beading effect. Importantly, the treated surface maintains its natural appearance.