Products in Building & Construction: Prepreg

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications.

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

NP193PM is composed of a 17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix which includes a non-conducting solid lubricant. This composite has excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes.

HS Carbon Fiber UD100H60 is a E3 Matrix System with a precursor as PAN.

HS Carbon Fiber UD125H60 is a E3 Matrix System with a precursor as PAN.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

PREGNIT TP-PC is a transparent, dimensionally stable, impact resistant, flame retardant possible according to UL94-VO, printable.

Evopreg® PA is a range of thermoplastic tape manufactured from polyamide-6 (PA6) polymer with unidirectional carbon fiber and is suitable for automated tape laying, winding and compression molding into highperformance, lightweight components. Thermoplastic tapes can provide outstanding mechanical performance, clean manufacturing processes, low waste and the potential for easier recyclability at end-of-life. Much like traditional thermosets, there are also multiple processing routesavailable; however, processed parts can be subsequently post-formed to create more complex shapes. Additionally, thermoplastic tapes can be stored almost indefinitely, compared to the limited shelf-life of pre-impregnated thermoset tapes.

F161 is a structural, heat resistant and electrical grade epoxy formulation designed for autoclave curing. F161 is a high temperature, laminate grade epoxy resin with a 350°F (177°C) cure. F161 is unique in that it was the first resin system to meet all types and classes of MIL-R-9300 B.

THINPREG™ TP 415 is a rubber toughened version of TP402, design for sporting goods application, combining high elongation and great toughness. It is available in ultra-Thin Ply format, as low as 15gsm. This hot-melt epoxy prepreg is recommended to be cured at 135°C for optimal performance and a Tg until 145°C Onset (by E’ DMA). This matrix has a very good flow control. TP415 offers excellent mechanical properties on a wide variety of fibers, and fiber weights.

7057 PTFE-Glass Fabric is a Mechanical Grade PTFE-Glass Fabric is preferred in applications where economy is more important than maximum resistance to chemicals and solvents. Applications include chemical resistant laboratory aprons, protective curtains for paint spraying and bottle washing, acid protection and food packaging.

Ecotechnilin L-FLAXPREG-T-UD-50-60m² is a unidirectional (UD) fibers - FLAXPREG T-UD 50.

AX-3112T is a High Toughness, Flame Retardant, Epoxy Fiberglass Prepreg.

THINPREG™ TP 150SC is designed for the automotive market due to the snap-cure capability for low TAKT times while achieving good mechanical properties, and the additional benefit of not requiring frozen or refrigerated storage.

AtenPly CPPS35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Taconic 7108 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

IM Carbon Fiber UD125 H60-MR70 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD200H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

AtenPly GPE35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

IM Carbon Fiber UD100H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.

7037 PTFE-Glass Fabric is a Mechanical Grade PTFE-Glass Fabric is preferred in applications where economy is more important than maximum resistance to chemicals and solvents. Applications include chemical resistant laboratory aprons, protective curtains for paint spraying and bottle washing, acid protection and food packaging.

THINPREG™ TP 736LT is an exceptionally versatile hot-melt, epoxy prepreg. It can be cured at temperature as low as 80°C (176°F), or can be used for faster molding of components at 120°C (248°F). This is achieved with a good out-life of up to 60 days at 18-22°C (64-72°C)..

IM Carbon Fiber UD150H60-MR60H is a E3 Matrix System with a precursor as PAN.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

OM13 is a structural resin system. It is translucent when cured.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

Taconic 7278 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

7147 PTFE-Glass Fabric is a Mechanical Grade PTFE-Glass Fabric is preferred in applications where economy is more important than maximum resistance to chemicals and solvents. Applications include chemical resistant laboratory aprons, protective curtains for paint spraying and bottle washing, acid protection and food packaging.

CM12 resin is Mid Tg, dicy-free fast cure, hot demoldable isothermal press curable resin system and it is suitable for sanding and metal composite hybrid part production. Drapability is suitable for press molds and low to medium tack optimized for press curing. Performance of prepreg system with CM12, capable of Class A Surface.

IM Carbon Fiber UD150H60-MR70 is a E3 Matrix System with a precursor as PAN.

Plain weave CARBON FIBER PW 3K PRE-PREG may be stored at 75° F for a shelf life of 90 days and for maximum shelft life, sotre below 10° F for a maximum of 2 years and bring to room temperature for fabrication.

OM 13SF is a Sandable surfacing film and autoclave curable, sandable, Class A giving surfacing film.

EF 10 is highly toughened Mid Tg prepreg can be cured with autoclave and used in extreme applications in automotive industry and aviation industry.

Taconic 7148 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

Ecotechnilin L-FLAXPREG T-UD-50-5m² is a unidirectional (UD) fibers - FLAXPREG T-UD 50.