Products in Building & Construction: Surfactant

STEOL® DES32-IS functions as an anionic surfactant, playing a pivotal role in gypsum wallboard manufacture and textile applications. Its influence is particularly pronounced as a gypsum foaming agent. It finds relevance in neutral scouring textile applications and textile wet processing.

ALPHA FOAMER® G stands out as an anionic surfactant tailored for maximum foaming in diverse conditions, including challenging scenarios like hard water and gypsum solutions for gypsum wallboard production. Primarily utilized as a gypsum foaming agent, it finds application in the construction market, specifically within gypsum-based material production.

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

Venadol® 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 85 is an effective weitting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Redicote E-47 NPF is a nonionic emulsifier for the production of slow-setting emulsions from bitumen, tall oil pitch, dust oils and resins.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Wetfix AP47 is a low hazard adhesion promoter and warm mix additive.

Redicote C-320 is a emulsifier for cationic quick-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Redicote C-320E is a emulsifier for cationic slow-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing.

Redicote E-4875 NPF is a emulsifier for cationic slow setting emulsions suitable for tack, prime, slurry seal, cold mix and sealcoats.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Redicote E-4850 is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-620 is a nonionic co-emulsifier and wetting agent for prime emulsion, dust control and rejuvenating oil emulsions.

Redicote E-7000 is a emulsifier for anionic and cationic slow set bitumen emulsions suitable for tack, prime, slurry seal, dust oil and cold mix applications. Emulsifier for slow set emulsion used in sealcoat manufacture.

Redicote C-500-1 is a emulsifier for cationic quick-set bitumen emulsions for quick-traffic slurry and micro surfacing.

Redicote C-450-1 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Wetfix AP17 is a adhesion promoter for hot and warm mix.

Wetfix 312R is a 100% active lower odor antistrip that provides the best value for the money.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.

Redicote E-605 is a emulsifier for cationic medium-setting emulsions and tack coats. Emulsifier for oils and soft bitumen used in dust control emulsions.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Perma-Tac 99 is a liquid antistrip for hot mix asphalt.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Wetfix G400 is an environmentally friendly, exceptionally low odor adhesion promoter and compaction aid, compatible with standard and PPA modified asphalt binders