Products in Building & Construction: Laminate

ES1 is a melamine laminate composed of a white melamine paper core and various pigmented cover sheets. The three-ply material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull).

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

ES2 consists of three internal layers (two colored decorative surfaces, two white sub-cores just below the surfaces, and a black core centered in the thermoset composite material). ES-2 is a five-ply material, which comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard-thicknesses of 3/32 and 1/8 inch. Weights of the three standard-thickness sheets are approximately 7.0, and 9.3 lb., respectively. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

ES4 is composed of layers of a pigmented paper melamine resin inner cores and white, black, or colored cover sheets. The main difference between this product and ES-1 is that the ES-4 core is colored rather than white. The material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull). Contact Customer Service for Availability.

MC330 is a cotton cloth/phenolic resin composite which is specially processed to be used in cryogenic applications. Such applications include spacers for installation of liquid oxygen apparatus where temperatures are as low as minus 320° F.

ES3 consists of a black phenolic paper core and two colored decorative surfaces impregnated with melamine resin. The three-ply, high performance material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

Phenolic paper based grade for mechanical applications. Good tensile, compressive and flexural strength. Primarily a machining material, but may be hot punched up to .093" thick. NP610 meets MIL-I24768/12 Type PBM, ASTM D709 Type X and IEC 60893-3-4 PFCP 201.

ACP Composites Carbon Fiber High Gloss Woven Sheets are an outstanding decorative laminate with a deep, glossy, three dimensional finish. Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.

Acculam™ Epoxyglas G10/FR4 is a laminate sheet comprised of a flame retardant epoxy resin and a woven fiberglass substrate. This grade qualifies to NEMA FR4 and MIL-I-24768/27.This material has high mechanical strength and excellent electrical insulating qualities in both dry and humid conditions. These attributes along with good fabricating characteristics allow this grade to be used in a wide variety of electrical and mechanical applications.

Lamitex® G-11/G-10 EP GC 22 laminated sheet is a woven glass fabric composite impregnated with an epoxy resin. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. It is frequently specified for its excellent resistance to chemicals and retention of good electrical properties in dry and high humidity environments. G-11 is non-brominated, is not flame retardant and should not be confused with a similar glass epoxy grade FR-5 which is flame retardant.

Versitex® VR2 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

Lamitex® G-7 SI GC 21 glass/silicone laminated sheets are primarily used for mechanical, electrical and electronic applications where high mechanical strengths are required at temperatures up to 220°C. G-7 exhibits extremely good dielectric loss properties under dry conditions and good electrical properties under humid conditions.

Aekyung Chemical CW-350 is a tere type UPR.

Polyply Composites Polyply ChemBlok CR-900 are U.L. Listed, glass reinforced, UV inhibited composite sheets that offer excellent chemical and flame resistance wherever a cost effective general-purpose corrosion material is required. Example uses of this material, are Fume Hood Liners and Hockey rink walls.

Lamitex® G-5 MF GC 21 glass/melamine laminated sheet is most frequently preferred for applications that require high mechanical strength, exceptional arc resistance and self extinguishing properties.

Acculam™ Epoxyglas Cowskin comprised of an epoxy resin binder, woven glass substrate and tough outer skins for improved surface wear resistance.This material has high mechanical strength in both dry and wet conditions. It is engineered as a carrier material in the polishing of hard disk drives and silicone chips. Its tough outer skins protect against exposing abrasive glass fibers and extend normal carrier life by more than five times.

Lamitex® G-10CR/G-10 EP GC 21 laminated sheet is a woven glass fabric composite impregnated with an epoxy resin. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. It is frequently specified for its excellent resistance to chemicals and retention of good electrical properties in dry and high humidity environments. G-10 is non-brominated and is not flame retardant and should not be confused with a similar glass epoxy grade FR-4, which is flame retardant.

MICAM LSM21 is a high performance glass-fiber reinforced decorative laminate material suitable for protection and security of indoor public spaces such as airports and railway stations. The material is constructed from a glass-fiber reinforcement in a phenolic resin matrix with a durable decorative melamine surface layer. It is manufactured by a high pressure lamination process under an ISO9001 certified Quality Management System.

MICAM EM42 is a limited fire hazard laminate which is a glass-fiber reinforced epoxy resin composite material. It is produced by a high temperature and high pressure process which produces a high strength void-free laminate suitable for a range of applications including electrical insulation and building construction applications.

Versitex® VX3 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Versitex® VR1 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

ACP Composites Carbon Fiber Plain Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance. As the thinnest of our carbon fiber sheets, these veneers are easy to trim and cut. The single layer of 3K plain weave carbon fiber prepreg allow the sheets to be semi-flexible yet remain stiff like cardstock. They can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces.Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber veneers possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike other manufacturing methods, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups. These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Vetronite® EGS 103 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green beige color with EP GC 203 G-11 Standards.

CFP Composites FR10 is a ultra lightweight fireproof carbon composite fire door materials.

ISOVAL® 10 R is made of glass roving fabric using the temperature-resistant ISOVAL® epoxy resin system. This gives the material excellent heat resistance and high compressive strength even at elevated temperatures with low thermal conductivity at the same time. The laminate has a permanent temperature resistance of 180 °C.

45NK is a woven Kevlar® aramid fiber reinforced multifunctional epoxy laminate and prepreg systemengineered to provide in-plane CTE values as low as 6 ppm/°C for compatibility with leadless alumina ceramic chip carriers (LCCC's) and other low expansion SMT devices where control of laminate expansion is critical for solder joint reliability. 45NK exceeds the requirements of IPC 4101/50 (Type AFG).

CFP Composites BM-5 is cost comparable to aluminum on a fully finished component basis, but with all the benefits of carbon fiber.

Acculam™ Epoxyglas G11 nonFR comprised of heat resistant/halogen free epoxy resin and a woven fiberglass substrate. It qualifies to NEMA G11 and MIL-I-24768/3This material exhibits extremely high mechanical strength at elevated temperatures and has good dielectric loss and electric strength properties under both dry and humid conditions. It is resistant to flow, dimensional change, chemicals and has low moisture absorption.

Aekyung Chemical CW-220 is an iso type UPR.

Acculam™ Phenolfab Canvas CYBS is a laminate sheet comprised of a phenolic resin binder and woven canvas (cotton) substrate with graphite added to enhance self-lubrication.This material is characterized by good mechanical properties and toughness. It has similar mechanical properties to C/CE. It is not intended for applications needing electrical resistance. It has good machining qualities and good wear resistance.

V2 Composites V2 T-Biscuits are custom carbon/glass fiber reinforced plastic laminates designed to repairfailed flange-to-flange shear connectors of pre-cast concrete (single & double) Tee beams. Aspecially engineered tri-axial carbon fabric is used to provide high strength, while a proprietarytextured glass fabric is bonded on the exterior face to provide additional toughness as well as arough bonding surface. The constituent resin matrix is a proprietary epoxy with proven ability toprovide strength along with superior chemical resistance, especially to salt and gasoline. Using aproprietary aerospace composite manufacturing technique, the fabric and resin are combined toform a finished composite laminate.

Versitex® VX4 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Aekyung Chemical CW-200 is a DCPD modified UPR.

ACP Composites Carbon Fiber Twill Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish ideally used in high-end decorative projects. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance.