Products in Consumer Goods: Pigment

CONSTAB CC 18162 PP incorporates 60% titanium dioxide within a homopolymer matrix, creating a proven white masterbatch tailored for fiber applications. Operating as a pigment, it imparts a white color and boasts attributes such as excellent opacity, excellent whiteness, good dispersion, and high gloss. It finds its place across various markets, including consumer goods, industrial, printing, and packaging.

Ti-Pure™ R-103 is a rutile titanium dioxide pigment manufactured by the chloride process. Its high opacity and very blue undertone tint produce clean, bright whites at low loadings in clear resins and those with natural color. Ti-Pure™ R-103 is specially formulated to reduce the discoloration of resin compounds and finished plastic products during processing and exposure to ultraviolet light.

Ti-Pure™ R-350 is designed to exceed today’s expectations for titanium dioxide and set tomorrow’s standard in plastic formulations. This product is intended for formulators looking for a single grade of TiO2 with performance suitable for a wide range of plastic end uses. It provides a matchless combination of excellent dispersion and processing, minimal volatile content, minimal interaction with polymer additives, durability, and the brightness that only chloride-produced rutile TiO2 can provide. This product is the only TiO2 available that can offer such an exceptional set of properties.

MOCOM Compounds ALCOLOR® PBT BL5202-18 is a blue colorant, similar to RAL 5017, for use in Polybutylene Terephthalate. It has a dosage of 4.0% for extrusion and 4.0% for injection molding, depending on wall thickness and required color intensity and application. It is free from cadmium, lead, and diarylide pigments and has a high additive content and high dispersibility.

MOCOM Compounds ALCOLOR® PBT YL5211-18 is a yellow, cadmium, lead, and diarylide-free pigment with a high additive content, high dispersibility, and dust-free properties. It has a light fastness colorant of blue woolscale 6, making it suitable for use in injection molded parts, extruded parts, compounding, and other Polybutylene Terephthalate applications. This pigment is ideal for Automotive, Machinery, electrical and electronic, Furniture, building and construction, and sport and leisure markets.

MOCOM Compounds ALCOLOR® PA BL5037-16TL is a blue colorant for use in Polyamide, with a dosage of 5.0% extrusion and 5.0% injection molding depending on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, is dust-free, and has a high dispersibility and additive content. It is suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOLOR® PBT WT5065-17 is a Polybutylene Terephthalate based colorant with a color of white, similar to RAL 9010, and similar to RAL 9016. It has a dosage of 2% for extrusion and 2% for injection molding, depending on wall thickness and desired color intensity. It is free from cadmium, lead, and diarylide pigments and has a high additive content and high dispersibility, making it suitable for use in automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure industries.

MOCOM Compounds ALCOLOR® PC A GY1238-07TL is a light fastness colorant in gray, similar to RAL 7001, with a dosage of 1.3% for extrusion and injection molding, depending on the application and operational area. It is based on polycarbonate, free from cadmium, lead and diarylide pigments, and is dust-free, with a high dispersibility and additive content. It is suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure industries for injection molded, blow molded, and extruded parts. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOLOR® PC FC RD5026-17 is a red colorant designed for use in polycarbonate applications such as injection molded parts, blow molded parts, and extruded parts. It has a dosage of 2% injection molding and 2% extrusion, depending on wall thickness and required color intensity. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. Furthermore, it has a Light Fastness colorant of blue woolscale 7.

MOCOM Compounds ALCOLOR® PC FC YL5028-17 is a yellow colorant for use in polycarbonate, suitable for injection molding and extrusion. The dosage is 2% for injection molding and 2% for extrusion, depending on wall thickness and required color intensity. The base polymer is polycarbonate, and the light fastness colorant is blue woolscale 8. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high additive content.

MOCOM Compounds ALCOLOR® Function PC/ABS UV A GY3003-12 is a gray color, similar to RAL 7038, for use in a polycarbonate + Acrylonitrile Butadiene Styrene Blend. The recommended dosage is 5.0% for both extrusion and injection molding, depending on wall thickness and desired color intensity. The colorant used is blue woolscale 8 and the base polymer is a polycarbonate + Acrylonitrile Butadiene Styrene Blend. The filler/additive system contains a light stabilizer, making it UV stabilized, free from cadmium, lead and diarylide pigments, dust-free, and boasting a high dispersibility and high additive content. It is suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOLOR® PC A WT939-2384 is a colorant for use in polycarbonate applications, with a dosage of 10% for injection molding and 10% for extrusion dependent on wall thickness and required color intensity. It is a blue woolscale 8 light fastness colorant, free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. It has a thermal stability of 300°C max and should be stored dry and protected from light. It is suitable for applications in the electrical and electronic, furniture, building and construction, and sport and leisure markets.

MOCOM Compounds ALCOLOR® ABS A GY3081-10 is a high-quality colorant designed for use with Acrylonitrile/Butadiene/Styrene (ABS) copolymer. This gray colorant is free from cadmium, lead, and diarylide pigments, making it a safe and environmentally friendly choice. Its high dispersibility and additive content ensure consistent color intensity and excellent processing properties with no adverse impact on the environment.

MOCOM Compounds ALCOLOR® ABS A BL1237-08 is a blue-colored acrylonitrile/butadiene/styrene (ABS) copolymer free from cadmium, lead, and diarylide pigments, and with a high additive content. This material is designed for use in injection molded and extruded parts in various market segments, including electrical and electronic, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOLOR® PC A GY1127-07 is a gray colorant, similar to RAL 7045, specifically formulated for use in polycarbonate. It is free from cadmium, lead, and diarylide pigments and is dust-free, with a high additive content and suitable for food contact. It has a light fastness colorant of blue woolscale 8 and a dosage of 5.0% extrusion and 5.0% injection molding, dependent on wall thickness and required color intensity dependent on application and operational area.

MOCOM Compounds ALCOLOR® PA A OR3155-11 is a light fastness colorant in blue woolscale 3 with a base polymer of Polyamide 6, similar to RAL 2005 in orange color. The dosage for extrusion and injection molding, depending on the application and operational area, is 3.0%. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. It is suitable for use in Polyamide and is mainly used in electrical and electronic, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOLOR® Function ABS UV CX GY1010-04 is a gray colorant similar to RAL 7036 and is used in electrical and electronic, furniture, building and construction, sport and leisure applications. It is composed of a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer, a light fastness colorant of blue woolscale 8, and a filler/additive system of light stabilizer. It is UV stabilized, free from cadmium, lead and diarylide pigments, has a high dispersibility, is dust-free and has a high additive content.

MOCOM Compounds ALCOLOR® Function ABS UV A BK1356-04 is a black colorant with a light fastness of 8 on the Blue Wool Scale. It is based on an Acrylonitrile/Butadiene/Styrene/Copolymer (ABS) polymer and contains a light stabilizer filler/additive system. The colorant is easy to flow, UV stabilized, free from cadmium, lead, and diarylide pigments, and dust-free, with a high dispersibility and additive content. It is suitable for use in injection molded parts for electrical and electronic, furniture, building and construction, and sport and leisure applications, with a dosage of 5%, depending on wall thickness and required color intensity based on the application and operational area.

MOCOM Compounds ALCOLOR® PC A GY937-3999 is a gray colorant, similar to RAL 7044, which is a light fastness colorant with a blue woolscale 7 and is free from cadmium, lead and diarylide pigments. It has a dosage of 5% extrusion and 5% injection molding, and is suitable for use in polycarbonate. It has a high dispersibility, is dust-free, and has a high additive content, making it suitable for applications such as electrical and electronic, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOLOR® PA A WT1159-03MG is a colorant with a white color, similar to RAL 9016, free from cadmium, lead and diarylide pigments, dust-free, and high dispersibility and additive content. It is suitable for use in Polyamide and is suitable for electrical and electronic, furniture, building and construction, sport and leisure applications. For optimal results, it should be stored in a dry, light-protected environment not above 30°C.

MOCOM Compounds ALCOLOR® SMMA FC BK5030-18 is a black colorant specifically designed for use in Styrene Methyl Methacrylate, with a light fastness rating of 8 on the blue woolscale. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. The dosage for extrusion and injection molding is 2.5%, depending on the application and operational area. It is suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure applications and has a thermal stability of up to 300°C.

MOCOM Compounds ALCOLOR® PC FC BL5027-17 is a blue colorant with several special attributes, such as being food contact safe, free from cadmium, lead and diarylide pigments, dust-free, and having high dispersibility and high additive content. It is suitable for use in polycarbonate for injection molding and extrusion, and can be used for applications in the electrical and electronic, furniture, building and construction, sport and leisure, food processing industry, domestic appliances, household goods, and packaging market segments. The dosage for injection molding and extrusion varies depending on wall thickness, color intensity, and the application and operational area.

MOCOM Compounds ALCOLOR® PC BK5216-18TR is a black-colored pigment for use in polycarbonate with a dosage of 2.0% extrusion and 2.0% injection molding, depending on the application and operational area. It is a dust-free pigment with high dispersibility and high additive content, and is free from cadmium, lead and diarylide pigments. It is suitable for use in electrical and electronic, furniture, building and construction, sport and leisure applications.

MOCOM Compounds ALCOLOR® SMMA FC RD5028-18 is a lightfast colorant with a base polymer of Styrene Methyl Methacrylate and a color of red. It is free from cadmium, lead, and diarylide pigments, dust-free, and has a high dispersibility and additive content. It is suitable for use in Styrene Methyl Methacrylate, electrical and electronic, furniture, building and construction, and sport and leisure applications, and can be used in injection molded parts, blow molded parts, and extruded parts. The recommended dosage is 3.0% extrusion and 3.0% injection molding depending on the application and operational area.

MOCOM Compounds ALCOLOR® PC A GN936-3471 is a light fastness colorant free from cadmium, lead, and diarylide pigments with a blue woolscale 7. It is dust-free, has a high dispersibility and additive content, making it suitable for use in polycarbonate for injection molded parts, blow molded parts, and extruded parts. The color is green and it is suitable for use in electrical and electronic, furniture, building and construction, sport, and leisure markets. It should be stored in a dry, light-protected environment not exceeding 30°C, with a thermal stability colorant of 280°C max.

MOCOM Compounds ALCOLOR® HTC FC RD5003-19TR is a light fastness colorant with a blue woolscale 7 base polymer, with a color of red. It is suitable for use in high temperature copolyester and is free from cadmium, lead and diarylide pigments, and is dust-free, with high dispersibility and high additive content. This product is suitable for electrical and electronic, furniture, building and construction, sport and leisure, and food processing industries. Depending on the application and operational area, it should be dosed at 2.0% for extrusion and 2.0% for injection molding.

MOCOM Compounds ALCOLOR® PA YL5046-16 is a yellow color similar to RAL 1016, with a light fastness colorant of blue woolscale 3 and a dosage of 4.0% for extrusion and 4.0% for injection molding depending on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, dust-free, and has a high additive content and high dispersibility. It is suitable for use in polyamide and is used in the automotive, electrical and electronic, furniture, building and construction, and sport and leisure markets.

MOCOM Compounds ALCOLOR® ABS A BL1238-08 is an Acrylonitrile/Butadiene/Styrene (ABS) copolymer with a blue color similar to RAL 5017. It is designed for use in injection molded and extruded parts for various applications, including electrical and electronic, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOLOR® ABS A GY77-4072 is a gray-colored acrylonitrile/butadiene/styrene (ABS) copolymer, similar to RAL 7021 color. It is free from cadmium, lead, and diarylide pigments and has high dispersibility and high additive content. The market segment for this product includes electrical and electronic, furniture, building and construction, sport and leisure, making it suitable for use in injection-molded parts and extruded parts.

MOCOM Compounds ALCOLOR® PA A OR5030-15 is a colorant for Polyamide 6 and is orange, similar to RAL 2002. It has a dosage of 2.0% extrusion and 2.0% injection molding, depending on wall thickness and required color intensity. It is free from cadmium, lead and diarylide pigments, dust-free, and has high dispersibility and high additive content. It is suitable for applications such as blow molded parts, extruded parts and injection molded parts in the electrical and electronic, furniture, building and construction, and sport and leisure markets. Its thermal stability is up to 280°C and is suitable for a wide range of applications.

MOCOM Compounds ALCOLOR® PC WT5013-18 is a white colorant similar to RAL 9016, free from cadmium, lead, and diarylide pigments. It has a light fastness woolscale of 8, high dispersibility, and additive content. It is suitable for use in polycarbonate blow molded, extruded, and injection molded parts for applications in electrical and electronic, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOLOR® PC FC GN5029-17 is a green polycarbonate colorant with a dosage of 2.0% for extrusion and 2.0% for injection molding, depending on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, dust-free, and has high dispersibility and a high additive content.

MOCOM Compounds ALCOLOR® Function PC UV WT5052-17 is a white colorant suitable for use in polycarbonate for electrical and electronic, furniture, building and construction, and sport and leisure applications. It has a dosage of 4.0% for extrusion and 4.0% for injection molding, depending on wall thickness and required color intensity. It is UV stabilized and free from cadmium, lead, and diarylide pigments and has a light fastness colorant of Blue Woolscale 8. It has a filler/additive system of light stabilizer, is dust-free, has high dispersibility, and a high additive content.

MOCOM Compounds ALCOLOR® PA A BK3030-12 is a black colorant with a similar RAL 9011 shade and a light fastness woolscale rating of 8. It is a polyamide base polymer, free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. It is used in automotive, electrical and electronic, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOLOR® POM H GN28964.3 is a Polyoxymethylene Copolymer colorant with a green color and a light fastness colorant of blue woolscale 8. It is free from cadmium, lead, and diarylide pigments, and has a high additive content, high dispersibility, and is dust-free. It is suitable for use in Polyoxymethylene/general and Polyoxymethylene Copolymer applications, and is suitable for use in Machinery, Electrical and Electronic, Furniture, Building and Construction, and Sport and Leisure applications. The dosage must be adjusted according to wall thickness and required color intensity, and should be adjusted based on the application and operational area.

MOCOM Compounds ALCOLOR® HTC FC BK5015-16 is a black, similar to RAL 9017, colorant specifically designed for use in High Temperature Copolyester. It is dust-free and has a high dispersibility, and is free from cadmium, lead, and diarylide pigments. The recommended dosage for this product is 2.0% for extrusion and 2.0% for injection molding, depending on wall thickness and required color intensity. Its light fastness is rated at blue woolscale 7, making it suitable for building and construction, sport and leisure applications where it can be used for blow molded parts, extruded parts, and injection molded parts.