Products in Consumer Goods: Silicones

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

H-Sil® SDF 12,500 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 1000 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 350 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 60,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

ELASTOSIL® R 401/55 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 420/60 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

ELASTOSIL® E60 N Black is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Black shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230 °C without damage.

ELASTOSIL® R 756/60 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.

CENUSIL® M 810 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. It has excellent flowability and good self-dehydration. This addition-curing silicone rubber is primarily used for creating molds without shrinkage and with exceptional reproduction accuracy.

ELASTOSIL® R 756/70 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.

ELASTOSIL® E50 N Transparent is a flowable, one-part silicone rubber for potting, coating, or sealing applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully vulcanized ELASTOSIL® E50 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

WACKER® Crosslinker V 24 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. It offers a good cure, ensuring the effective curing of coatings. This crosslinker provides low release properties, making it suitable for applications where minimal release is desired. It also exhibits good release stability, maintaining its performance over time. Additionally, WACKER® Crosslinker V 24 demonstrates excellent anchorage to paper and film substrates.

WACKER® E35 100 is a 35% emulsion of medium-viscosity polydimethylsiloxane. It is primarily designed for use in applications for mold release, furniture polish, textile finishing, and other specialty formulations. WACKER® E35 100 contains sodium nitrite as a corrosion inhibitor. It should not be used in contact with amines.

WACKER® E35 10000 is a 35% emulsion of a high-viscosity polydimethylsiloxane. It is designed to be used in many applications, such as mold release, car and furniture polish, textile lubricants and softeners, automotive care,and other specialty product applications. The E35 Series emulsions contain sodium nitrite as a corrosion inhibitor. These emulsions should not be used in contact with amines.

ELASTOSIL® R 500/70 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

ELASTOSIL® R 401/40 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/60 KX is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

SIPELL® AE 34 is a non-ionic microemulsion of an amino-functional silicone fluid. It is primarily used as a hand-modifying additive to provide a pleasant, soft-soap hand feel. SIPELL® AE 34 finds its main application in the treatment of leather for cloth and furniture, where it helps enhance the tactile properties and softness of the treated material.

ELASTOSIL® R 401/60 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

ELASTOSIL® E60 N Red is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Red shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230 °C without damage.

ELASTOSIL® RT 703 is a self-leveling, slightly thixotropic, one-part heat-curing silicone adhesive. It can also be used for surface printing purposes when applied by serigraphy. Cured ELASTOSIL® RT 703 displays excellent adhesion to various substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand changing climatic conditions, UV radiation, and temperatures as high as 200°C (392°F) without damage.

ELASTOSIL® Film 2030 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.

ELASTOSIL® R 420/50 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

SIPELL® CE 27 is a flowable, water-based dispersion of precured silicone rubber. It is primarily used as an additive to impart a pleasant, greasy hand feel. In addition, SIPELL® CE 27 is utilized to enhance the abrasion resistance of finished leather goods.

ELASTOSIL® R 756/40 OH is a high consistency silicone rubber that undergoes peroxide curing. The resulting vulcanizates exhibit outstanding resistance to hot air, especially when a heat stabilizer is added. These vulcanizates also demonstrate favorable properties such as good tear resistance, low compression set, and high elasticity.

ELASTOSIL® E60 N Grey is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Grey shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C without damage.

ELASTOSIL® R 755/60 OH is a high-consistency silicone rubber grade developed specifically for manufacturing articles with good steam resistance. This product is steam-resistant and is suitable both for extrusion of tubings and profiles and for compression, transfer, and injection molding.

CENUSIL® M 820 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. It has excellent flowability and high tear strength. This addition-curing silicone rubber is primarily used for creating molds without shrinkage and with exceptional reproduction accuracy.

ELASTOSIL® E43 N Transparent is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C without damage.