Products in Electrical & Electronics: Connectors

SABIC's Specialties Business NORYL GTX830 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8200 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX830 resin is an excellent candidate for a wide variety of applications including automotive under the bonnet applications and water meter housings. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP ELCRIN WF0061iQ compound is based on Polybutylene terephthalate (PBT) resin utilizing ELCRIN iQ upcycling technology containing minimum 25% Post-Consumer Recycling (PCR) weight content and 30% glass fiber. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, UL94V0 and 5VA Flame Rating, Excellent Chemical Resistance. This is a good candidate for a variety of applications needing a more sustainable FR and PBT solution.

SABIC's Specialties Business NORYL NH5120 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm.NORYL NH5120 resin offers a good balance of heat, flow, hydrolytic stability, low creep and dimensional stability along with mechanical property retention in tough outdoor environments.This material is an excellent candidate for:Outdoor housings / enclosuresHVAC componentsPhotovoltaic / solar junction box applications.FeaturesAmorphousDimensional StabilityFlame RetardantHigh Hydrolytic StabilityLow Moisture AbsorptionLow ShrinkageLow Specific GravityLow WarpageNon-HalogenatedUnreinforcedApplicationsAutomotive ElectronicsConsumer ElectronicsDisplaysMedical Devices & AssembliesCircuit BreakersConnectorsSwitches & RelaysRenewable Energy This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP RF0057E compound is based on Nylon 6/6 resin containing 25% glass fiber. Added features of this grade include: Non-Brominated & Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 20% Glass fiber filled, super high flow polyetherimide(PEI) (TG 217degC) with internal mold release and balance properties with flow and ductility, ECO conforming, UL94 V0 listing.

SABIC's Specialties Business NORYL N110 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This impact modified, injection moldable grade was developed for automotive body panel applications and meets the requirements of the Standard ECE Dashboard Impact Test. NORYL N110 resin offers heat resistance, good impact resistance, low specific gravity, and dimensional stability. It is an excellent candidate for a variety of automotive instrument panel applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 3473 is a reinforced blend of polyetherimide (PEI) and polyphenylenesulfide (PPS) that combines the benefits of both amorphous and semicrystalline materials. It features an excellent combination of reliable metallization, SMT lead-free solder capability, and extreme dimensional stability at high temperatures. The material provides a lightweight alternative to aluminum solutions, is RoHS compliant, and is easy to flow and suitable for injection molding.

SABIC's Specialties Business NORYL GTX934 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits improved processability and excellent heat aging performance. NORYL GTX934 resin was designed for high heat automotive under-the-hood applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ NH5110E resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with a Vicat B/120 temperature of 138C according to ISO 306. NORYL™ NH5110E resin was developed for low-beard growth during profile extrusion and is an excellent candidate for electrical conduit and cable management applications.

SABIC's Specialties Business LEXAN ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3.0mm flame retardancy based on non-chlorine, non-bromine FR systems. LEXAN ML6411 resin offers excellent processing characteristics with opportunity for shorter IM cycle times compared to standard PC. This product is available in a wide range of opaque colors and is an excellent candidate for a wide range of electrical applications.

SABIC's Specialties Business LNP ELCRIN WF0061BiQ is a 30% glass fiber reinforced, non-brominated, non-chlorinated flame retardant Polybutylene Terephthalate compound, utilizing iQ PBT chemical recycling process of Ocean Bound PET water bottles with minimum 28% post consumer recycled content. Added features of this material include: good flow and UL V-0 rating at 0.8 mm thickness.

SABIC's Specialties Business ULTEM™ Resin 1010R is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg of 217°C), improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The material is available in opaque colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 2300 resin is a standard flow 30% glass fiber reinforced polyetherimide resin.ULTEM 2300 resin is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance.ULTEM 2300 resin may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C.ULTEM 2300 resin is opaque and can be custom colored.FeaturesAmorphousChemical ResistantDimensional StabilityFlame RetardantGeneral PurposeGood AdhesionGood FlowGood Mechanical PropertiesHeat ResistanceHigh Hydrolytic StabilityHigh StiffnessHigh StrengthLow CreepLow Smoke EmissionLow ToxicityVery Good Heat ResistanceWide Temperature Operating RangeApplicationsConsumer Appliances & ElectronicsAutomotive LightingAutomotive Electrical & Electronic SystemsAutomotive Interior, Exterior & BodyPowertrain & UTHGlazing & Window ElementsInterior FixturesArtificial TurfAutomotive ElectronicsDisplaysIndustrial AutomationFurnitureHousewaresLawn & GardenMedical Devices & AssembliesNon-Food Consumer PackagingConnectorsPrinted Circuit Boards (PCBs)Semiconductor ManufacturingSwitches & RelaysPower & UtilitiesRenewable EnergyConsumer Goods for Sports & RecreationTextile ManufacturingAerospace & AviationOff Road & Recreational Vehicle (RV)Rail & Mass TransitOptical Fiber & Telecom This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL NH7010 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) and exhibits an excellent balance of non-brominated, non-chlorinated flame retardance, high heat resistance, good flow, and low specific gravity for light weight parts. This injection moldable grade carries UL94 flame ratings of 5VA at 2mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH7010 resin is an excellent candidate for applications such as electrical enclosures and solar/PV junction boxes. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business VALOX™ FR Resin ENH4560 is a 30% glass fiber-reinforced, non-chlorinated/brominated, flame-retardant polybutylene terephthalate (PBT) injection moldable grade with excellent chemical resistance. It has a UL94V0 rating at 0.80 mm and a 5VA/5VB rating at 1.5 mm. This material is a suitable option for applications that require a sustainable flame-retardant PBT solution.

SABIC's Specialties Business NORYL GTX840 resin is a 40% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 11860 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX840 resin is an excellent candidate for a wide variety of applications including automotive under-the-hood and water management. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP ELCRIN 610009UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 19% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Flame Retardant, UL746C F1 Rating, UL94 V0 and 5VA Flame Rating, UV Resistant, Impact Modified, Excellent Chemical Resistance. This is a good candidate for applications in the electrical industry including bobbins, switches, and enclosures.

SABIC's Specialties Business NORYL NH7010HV resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH7010HV resin is a higher flow version of NH7010 resin and offers a good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability. This material is a good candidate for outdoor housings / enclosures and photovoltaic / solar junction box applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ NHP6011 resin is an 8% glass fiber reinforced blend of polyphenylene ether (PPE). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL™ NHP6011 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for electrical vehicle (EV) battery modules/housings.

SABIC's Specialties Business NORYL™ NHP6012 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a CTI 2 and UL94 flame rating of V0 at 1.5mm for thin-wall molding capability. NORYL™ NHP6012 is based on a unique co-polymer technology and exhibits high flow, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. This material is an excellent candidate for appliance internals, indoor and outdoor electrical and electrical vehicle (EV) battery modules/housings.

SABIC's Specialties Business NORYL™ N1150 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm. NORYL™ N1150 resin offers heat resistance, good impact resistance, low specific gravity, and dimensional stability. It is an excellent candidate for a variety of automotive instrument panel applications.

SABIC's Specialties Business NORYL NH4050 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with UL746C Outdoor Suitability rating of F2. This material also exhibits chemical resistance to battery acids, hydrolytic stability, high impact and heat resistance, and low specific gravity for light-weight parts. NORYL NH4050 resin may be an excellent candidate for lead acid battery housings, covers, and enclosure applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL NH6010B resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high performance, injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm. NORYL NH6010B resin features low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC. In addition, this material is heat stabilized and impact modified. It is an excellent candidate for conduit and trunking applications in transportation, building + construction, and electrical markets. *see NORYL LS6010 resin for FAR 25.853 requirements. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL NH5020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and exhibits high heat resistance with thin-wall FR performance. NORYL NH5020 resin carries a UL94 flame rating of V0 at 0.75mm along with a UL746C Outdoor Suitability rating of F1. The material offers a good balance of affordable high heat, flow, hydrolytic stability, excellent creep resistance, dimensional stability and is a good candidate for photovoltaic / solar connectors, UPS Inverters / chargers, and outdoor enclosure applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ N1900 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N1900 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *this grade is also referred to as NORYL™ N190 in several regions.

SABIC's Specialties Business NORYL™ PX9406K resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VB at 2mm, 5VA at 2.5mm and V0 at 1.5mm. NORYL™ PX9406 offers strong electrical performance at thin wall, high heat resistance, low warpage, low moisture absorption, and dimensional stability. This material is an excellent candidate consumer electronics applications.

SABIC's Specialties Business ULTEM™ Resin 1000 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS-compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance needs to be checked case by case for colored variants. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 2310 is an improved flow 30% glass fiber reinforced polyetherimide resin. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ N190 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N190 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *This grade is also referred to as NORYL™ N1900 in several regions.

SABIC's Specialties Business NORYL™ LTA6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm, 5VB at 2mm, and V0 at 1.5mm. NORYL™ LTA6020 exhibits good dimensional stability over a wide temperature range, high heat performance, low moisture uptake, and offers long-term aging / retention of mechanical properties. It is an excellent candidate for solar / photovoltaic (PV) junction boxes and outdoor electrical enclosures.

SABIC's Specialties Business NORYL NH6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance and thin-wall FR performance. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL NH6020 resin passes VDE/DIN 475 part 815 testing, Ball Pressure Test (BPT) at 125C, GWFI 960C at 1, 2, 3mm, GWIT 825C at 1mm, and CTI >600V making this an excellent candidate for unattended appliance components where EN/IEC 60335 applies. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business NORYL™ PVX1201 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade exhibits low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability.

SABIC's Specialties Business NORYL GTX8408 resin is an 8% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high elongation, excellent chemical resistance, high heat resistance, and flow. NORYL GTX8408 resin is an excellent candidate for a wide variety of structural and electrical connector applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP ELCRES CRX1414 is an amorphous Polycarbonate (PC) copolymer resin that offers medium flow, high ductility in combination with excellent chemical resistance. This grade is available for custom coloring and may be an excellent candidate for a wide variety of applications that need improved chemical resistance. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL GTX944 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance along with improved processability and increased impact performance. NORYL GTX944 resin may be an excellent candidate for Firefighter Helmet applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.