Products in Medical Tapes & Adhesives

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.

ARcare® 90106NB is a clear, thin and flexible plastic film coated on both sides with a medical grade pressure-sensitive adhesive. The double-faced tape is protected by a white polyester release liner on both sides.

ARcare® 93691 is a double-sided medical grade pressure sensitive tape.

ARseal™ 90880 is a clear polypropylene film coated on both sides with a silicone pressure sensitive adhesive. This is a double-sided construction protected on each side by a PET release liner.

Setex Technologies DA 210 is a repeatable, residue-free, non-tacky tapes. These customized adhesive solutions can be used in applications such as semiconductor parts handling, glass handling, robotics end effectors, packaging and mounting to smooth surfaces.

ARcare® 90445Q is a clear, thin and flexible plastic film coated on both sides with a medical grade pressure-sensitive adhesive. The double-faced tape is protected by a clear polyester release liner on both sides.

Setex Technologies DA 310 is a repeatable, residue-free, non-tacky tapes. These customized adhesive solutions can be used in applications such as semiconductor parts handling, glass handling, robotics end effectors, packaging and mounting to smooth surfaces.

Setex Technologies DA 910/ DA 110 is a repeatable, residue-free, non-tacky tapes. These customized adhesive solutions can be used in applications such as semiconductor parts handling, glass handling, robotics end effectors, packaging and mounting to smooth surfaces.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~140 micron, D100 = 250 micron.

ARclear® 93495 is a 1.6 mil optically clear silicone pressure-sensitive adhesive coated between two fluorosilicone release liners.

SoftWear® 93257 is polyurethane film coated with a medical grade pressure-sensitive adhesive, utilizing a polyester release liner.

ARcare® 7717 is a single faced, white, closed cell, cross-linked EVA copolymer foam coated on one side with an aggressive medical grade pressure-sensitive adhesive. The release liner utilizes an 84# adhesive polycoated paper.

ARflow® 93025 is a 100 µm polyester film coated on one side with a hydrophilic coating. The hydrophilic coating side of the tape is protected by a polyester release film.

ARcare® 8026 is a silicone transfer film adhesive between two polyester release liners.

Arseal™ 90697 is a clear polypropylene film coated with a silicone pressure-sensitive adhesive. This single-sided tape is protected by a clear PET release liner.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70 micron, D100 = 150 micron.

ARflow® 93049 is a thin and flexible plastic film coated on one side with a hydrophilic pressure-sensitive adhesive. The adhesive side of the tape is protected by a clear siliconized polyester release liner.

A medical-grade double-coat adhesive tape with 0.5 mil PET carrier with differential paper release liner

ARcare® 8259 is a white, rigid plastic film coated on one side with a medical grade pressure-sensitive adhesive. The adhesive is protected by a clear polyester release liner.

ARcare® 93439 is an e-beam and gamma sterilizable medical grade pressure-sensitive adhesive coated on a white nonwoven fabric. The adhesive is skin-friendly and designed for long-term wear applications.

Cariflex™ IR0307 KU Polymer polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It has a high molecular weight as indicated by its Logarithmic Inherent Viscosity (LIV) value of 6.80 dl/g.

Cariflex™ IR0310 KU Polymer polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It has a high molecular weight as indicated by its Logarithmic Inherent Viscosity (LIV) value of 7.05 dl/g.

ARcare® 93363 is a medical grade, skin-friendly, pressure-sensitive adhesive coated on a stretchable polyurethane nonwoven fabric. The adhesive side of the tape is protected by a clear polyester liner.

NuSil™ MED-6342 is a soft silicone adhesive.

NuSil™ MED-6381 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.Comments: FIRM RTV GEL.