Products in Auto Care

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

BIO-TERGE® AS-40 SUPER is an anionic blend developed from sodium olefin sulfonate produced via stepan's falling film process. It is an ideal surfactant for various detergent and home care applications, including dishwashing detergents, laundry detergents, and all-purpose cleaning products. It offers excellent synergistic cleaning properties, particularly when combined with dodecylbenzene sulfonic acid, resulting in enhanced product performance and potential cost savings. Moreover, it exhibits greater stability than alcohol sulfates across a wide ph range.

BIO-SOFT® DR-13 is a versatile nonionic surfactant ideal for degreasing, wetting, and solubilization. It is well-suited for outdoor cleaners in applications like car and boat washes. Approved for direct release according to the u.S. Epa safer choice standard, it adheres to safety and environmental standards.

AMPHOSOL® MLB is a mild amphoteric surfactant that provides foam boosting and viscosity building for applications in personal care, home care, and industrial products. This surfactant is bio-based, naturally derived, sulfate-free, and eo po-free. Its primary function is to enhance foam and thicken formulations.

BIO-TERGE® PAS-8S E is a high-quality, light-colored, aqueous solution of primary alkane sulfonate, known for its low-foaming, biodegradable anionic surfactant properties. It offers excellent coupling and hydrotropic properties across a wide pH range. With exceptional solubility in acidic and alkaline systems, it's versatile for formulating industrial and institutional cleaners, ensuring compatibility with detergent builders and bleach.

MAKON® L62 is a nonionic eo/po block copolymer with properties like low foaming and good oil-in-water emulsification. Its versatility covers an array of markets, including household, industrial, institutional, agriculture, paints and coatings, pulp and paper, and textiles. It finds its niche in metal cleaning, spray washing, warewashing, rinse aids, general-purpose cleaning, textile wetting, and agricultural pesticide formulations. As with other makon® products, it maintains the characteristic of being a low-ash product.

BIO-TERGE® AS-40 HASB is sodium c14-16 olefin sulfonate that provides excellent viscosity, foam characteristics, and mildness. It is an ideal anionic surfactant for a variety of household, industrial, and institutional cleaning and personal care applications, as well as agricultural formulations and construction products used for concrete bases, firefighting foams, and dust control. It is preserved with excess alkalinity, which allows the formulator flexibility when choosing a preservative for their finished formulation.

NACCONOL® 40G is a powdered, 40% active sodium salt of linear alkylbenzene sulfonic acid that boasts high foaming, rapid wetting, and emulsification properties. It is a versatile choice for various cleaning formulations where foam is desirable. Its powdered nature lends itself well to high-active and powder formulations, as well as applications in construction products like concrete admixtures, firefighting foams, and dust control additives.

MAKON® NF-180 is a nonionic surfactant designed for low-foaming and defoaming applications, including rinse aids and warewash formulations. It also serves as a dispersant and wetting agent. Its solubility in various solvents, such as ethanol, isopropanol, methanol, toluene, xylene, and perchloroethylene, makes it versatile.

NACCONOL® 90G is a high-active sodium salt of linear alkylbenzene sulfonic acid, renowned for its high foaming, fast wetting, and emulsification attributes. It finds use in cleaning formulations where foam is desirable and is versatile enough to be used in high-active, powder formulations, as well as construction products like concrete admixtures, firefighting foams, and dust control additives.

AMPHOSOL® LB-HP is a lauramidopropyl betaine used in a variety of applications for personal care, home care, and institutional and industrial cleaning. This amphoteric surfactant can be used to boost foam and build viscosity in formulations. It is preserved with excess alkalinity, which allows the formulator flexibility when choosing a preservative for their finished formulation.

MAKON® L101 is a nonionic eo/po block copolymer distinguished for water-in-oil emulsification, low foaming, defoaming, and fast wetting attributes. Its usage spans metalworking, paints and coatings, agriculture, and industrial applications. Its core applications include anti-foaming, defoaming, oil cutting, dispersants, water-in-oil emulsifiers, emulsion polymerization, and textiles. It is a low-ash product.

NINOL® PC, an effective DEA amide, plays a crucial role in enhancing viscosity while simultaneously boosting and stabilizing foam. This versatile liquid nonionic surfactant finds widespread use in various applications such as shampoos, bubble baths and metalworking cleaners, offering consistent performance and reliability across diverse formulations and industries.

AMPHOSOL® CG-50 is a 37% active form of cocamidopropyl betaine derived from coconut oil. This high-active, mild amphoteric surfactant functions as a secondary surfactant, foam booster, and viscosity builder across personal care products, hard surface cleaning, vehicle care, and specialty foaming applications. It aligns with the surfactant screen of the u.S. Epa safer choice program and is listed on cleangredients.

BIO-SOFT® TA-2 is a nonionic tallow amine ethoxylate surfactant with functions that encompass wetting, foam generation, emulsification, and corrosion inhibition. Its primary use is as an acid thickener, making it valuable in cleaners intended for vertical surfaces like toilet bowls, dairy, brewery, and food processing equipment.

BIO-TERGE® AS-90 COARSE is a versatile, highly active anionic surfactant providing excellent wetting, foaming, and deterrent properties in alkaline, acidic, or neutral media and in the presence of metallic salts commonly found in hard waters. These characteristics make it suitable for a variety of personal care, household, and industrial applications, such as shampoo (bar soap), handsoap, bath products, and cleaning products, but it can also be used as a firefighting foamer or air-entraining agent for mortar and plaster.

MAKON® 17R2 is a nonionic reverse eo/po block copolymer renowned for its fast-breaking, low-foaming, and defoaming attributes. It finds application across diverse industries, including industrial, institutional, pulp and paper, textiles, paints and coatings, and more. Its usage is relevant in metalworking fluids, defoamers, dispersants, industrial lubricants, plasticizers, pulp and paper processing, rinse aids, and textile processing. As with other products in the makon® range, it is a low-ash product.

AMMONYX® DO 40 is a decyl amine oxide amphoteric surfactant, is employed in various cleaning applications. It offers low and fast-breaking foam, along with viscosity-building properties. This sulfate-free and preservative-free product serves markets including agricultural solutions, home care, institutional and industrial cleaning, and vehicle care.

AMPHOSOL® CG-UN is an amido-type betaine derived from refined coconut oil, providing foam boosting and viscosity building across applications like shampoos, automatic dishwashing detergents, baby care products, bathroom cleaners, body scrubs, and more, in markets like home care, institutional and industrial cleaning, personal care, and vehicle care.

STEPANOL® MG is an anionic surfactant recognized for its impressive detergency and high foaming properties. It finds a wide range of applications in detergent and personal care products, including shampoo, bubble bath, body wash, personal cleansing, hand dishwashing detergents, all-purpose cleaners, general cleaners, rug shampoo, and upholstery cleaners.

MAKON® DA-9 is a nonionic surfactant celebrated for its effectiveness as an emulsifier and as a crucial component in emulsifier blends for agricultural formulations. It plays a pivotal role as an hlb variable across various formulations. Belonging to the chemical group of decyl alcohol ethoxylates and nonylphenol ethoxylates, its functions encompass serving as an emulsifier, a versatile multifunctional wetting agent, and an adjuvant. It's noteworthy that this product carries kosher certification.

STEPANATE® SXS-30 is an anionic surfactant that serves in various capacities, including liquid detergent, heavy-duty cleaning, wax stripping, dishwashing detergent formulations, and textile applications. Its roles encompass functioning as a solubilizer, coupling agent, and cloud point depressant. The product has been certified as kosher.

AMPHOSOL® HCG is a naturally-derived cocamidopropyl betaine with 30% actives. This mild amphoteric surfactant offers foam boosting and viscosity building across personal care, hard surface cleaning, and specialty foamer products. Like other products, it carries attributes such as being bio-based, kosher-certified, naturally derived, plant-derived, sulfate-free, and free of eo and po.

AMPHOSOL® CS-50 E is a cocamidopropyl hydroxysultaine that is compatible with anionic, nonionic, amphoteric, and cationic surfactants and is stable over a wide ph range. It exhibits high foaming even in high electrolyte solutions and is stable in extreme alkaline solutions. This amphoteric surfactant exhibits foam synergies with common anionics and can be used in place of cocamidopropyl betaine to boost flash foam.

AMMONYX® MO operates as a myristamine oxide, functioning as a cleansing agent, foam stabilizer, and viscosity builder in personal care and h&i products. This amphoteric surfactant is suitable for high-viscosity formulations and finds applications in various markets, including agricultural solutions, home care, institutional and industrial cleaning, personal care, and vehicle care.

BIO-TERGE® AS-40K is an anionic surfactant prized for its excellent viscosity, foam characteristics, and mildness. This makes it particularly well-suited for personal care applications such as liquid hand soaps, shampoos, facial cleansers, body washes, and even hard surface cleaning. It meets the stringent requirements of the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEPANOL® SLS PASTE™ is a low-active, high-viscosity sodium lauryl sulfate, providing excellent foaming and viscosity-building properties. It can be formulated into a wide variety of personal care and detergent formulations, such as shampoos, liquid hand soaps, bath products, dishwashing detergents, fine fabric washes, and carpet cleaning products.

STEPANATE® SXS is an anionic surfactant that functions as a solubilizer, coupling agent, and cloud point depressant. Its applications span liquid detergents, heavy-duty cleaning products, wax stripping formulations, dishwashing detergents, and textile applications. It adheres to the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

NINOL® 40CO-E is a cochin oil-based dea amide providing viscosity building with foam boosting and stabilization. This liquid nonionic surfactant is used in shampoos, bubble baths, light-duty liquids, cutting fluids, drawing compounds, and metalworking cleaners. The product is bio-based, kosher-certified, naturally derived, plant-derived, and sulfate-free.

STEOL® CS-460 is a 60% active, synthetic 3-mole sodium laureth sulfate featuring excellent detergent and foaming properties. This anionic surfactant's ethanol content lends clarity and fluidity at room temperature. Its versatility spans shampoos, laundry detergents, h&i cleaners, textile mill keir boiling and bleaching formulations, textile detergents, and various agricultural applications.

STEPANOL® AMV PCK is an ammonium lauryl sulfate that can be used to achieve high-viscosity formulations. This anionic surfactant provides excellent foam and viscosity characteristics. It finds application in shampoos, body washes, liquid hand soaps, and bath products. This product is ideal for use in acidic shampoos and gel products.

MAKON® 4 is an all-high-active nonionic surfactant with diverse applications, including agriculture, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Their chemical group is nonylphenol ethoxylates, and they serve as emulsifiers, adjuvants, and wetting agents. This product is kosher-certified.

STEOL® CA-460 is a 60% active synthetic 3-mole ammonium laureth sulfate renowned for its excellent foaming and foam stability properties. This anionic surfactant, containing ethanol, maintains clarity and fluidity at room temperature. Its applications encompass liquid laundry detergents, car and truck washes, dishwashers, industrial foaming, scouring, leveling, and coupling in textile and metalworking applications.

BIO-SOFT® LFS-04 features proprietary nonionic surfactant technology specially tailored for effective hard surface cleaning applications, particularly those requiring low film/streak performance. It's highly suitable for glass and floor cleaning. Its notably low critical micelle concentration (cmc) makes it ideal for concentrated formulations that necessitate high dilution rates. It's also compatible with ready-to-use (rtu) cleaners.

BIO-SOFT® EA 10-85 is a nonionic surfactant that exhibits low foaming properties and excellent wetting action. It is a good emulsifier for industrial applications. It may be readily formulated into highly alkaline liquid systems and can be used in a variety of applications, including mechanical dishwashing, rinse aids, metal cleaning, spray washing, general-purpose cleaning, emulsion polymerization, textile wetting and scouring, oil field additives, agricultural adjuvants, and non-foaming emulsions.

AMPHOSOL® CS-50 is an amphoteric surfactant that can be used as a secondary surfactant, providing foam boosting and viscosity building for personal care and hi&i applications. It is a cocamidopropyl hydroxysultaine that is bio-based, kosher certified, naturally derived, sulfate-free, eo/po-free, and plant-derived.