Products in Adhesives & Sealants: Tackifier

STADEX® 10 Corn Dextrin is suitable for use as a direct additive in food products. It is classified as a Food Product by Primient. It may also be used in non-food applications.

STADEX® 132 Corn Dextrin is suitable for use as a direct additive in food products. It is classified as a Food Product by Primient. It may also be used in non-food applications.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

Bomar BR-3641AA is an aliphatic polyether urethane acrylate with a high molecular weight and theoretical 1.3 functionality. Films formulated with BR- 3641AA are highly flexible, elastomeric, and tacky. When formulated as an adhesive, this oligomer is excellent as an adhesion promoter or reactive tackifier. This oligomer offers improved adhesion to a variety of substrates.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

Bomar BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongative nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs).

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

BOMART BR-3641AJ is an aliphatic polyether urethane acrylate with a high molecular weight and theoretical 1.3 functionality. Films formulated with BR-3641AJ are highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier. It is a perfect choice for optically clear UV-PSAs.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Winlex 4270 is a liquid rosin ester. It is designed for applications requiring low odor and high tack. It has a suitable FDA status for use in food packaging applications covered by 175.105.

POLYTONE™ AP 120 is a non heat reactive thermoplastic alkyl phenolic resin designed to develop high tack levels in rubber compounds which are used in tire construction and mechanical goods.

Polybut 200 is a low molecular Weight Conventional Polybutene

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Kolon Industries SUKOREZ® SU-400 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-400 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

SureTac 1340 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SYLVARES TR 7115 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Polybut™ 30 is a low molecular weight conventional polybutene.

Polybut EM 190(A-50) is a water-based emulsion of low molecular weight polybutene.

Kolon Industries SUKOREZ® SU-420 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-420 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Kolon Industries SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

AQUATAC 6085 resin dispersion is an unique rosin ester dispersion for use in waterborne pressure sensitive adhesives. Formulations with AQUATAC 6085 will have aggressive tack and peel, as well as excellent shear properties.

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.