Products in HI&I Care: Excellent Solubility

STEPANOL® MG is an anionic surfactant recognized for its impressive detergency and high foaming properties. It finds a wide range of applications in detergent and personal care products, including shampoo, bubble bath, body wash, personal cleansing, hand dishwashing detergents, all-purpose cleaners, general cleaners, rug shampoo, and upholstery cleaners.

BIO-SOFT® N1-9 is a c11 linear alcohol ethoxylate with a high hlb, strong water solubility, and high cloud point, making it well-suited for general-purpose cleaning and fragrance solubilization. It offers emulsification, moderate to high foam, detergency, and moderate to fast wetting. Like other mentioned products, it complies with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

BIO-TERGE® PAS-8S is a low-foaming anionic surfactant with excellent coupling and wetting properties. Its versatility shines in formulating hi&i cleaners, covering areas like hard surface cleaning, carpet cleaning, machine dishwashing, and glass cleaning. Its compliance with the u.S. Epa safer choice program and cleangredients.Org adds to its appeal.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Det® A 25-9 is a non-ionic surfactant that is ideal for household and industrial and institutional (HI&I) applications. With higher water solubility, it is especially effective in removing high HLB soils. It appears as a hazy liquid to white paste.

Tiarco Stanfax 998HV is a high-quality anionic surfactant designed for a wide range of personal care and industrial applications. Known for its exceptional cleansing and emulsifying properties, this surfactant enhances the performance of products such as shampoos, body washes, and industrial cleaners. Its effectiveness in reducing surface tension allows for better penetration and spread, making it an essential ingredient for formulators seeking reliable solutions in both personal care and industrial markets.

Dissolvine M-40 has an assay of min. 81 weight percent. MGDA has three carboxylic groups and, together with the central nitrogen atom, these carboxylic groups provide strong multiple bonds with divalent and trivalent metal ions. The small molecular size enables rapid action at low temperatures and short contact time. The MGDA trisodium salt is fully REACH registered. The excellent low toxicity and low ecotoxicological profile allow for non-dangerous labeling. MGDA-Na3 is listed on EPA’s Safer Chemical Ingredients List in the United States. MDGA is a strong chelate for hard water and transition metal ions. Using MGDA as an ingredient in cleaning formulations improves the descaling and cleaning capabilities. This includes whiteness and color care benefits in laundry and stain removal abilities in automatic dish washing (ADW). Since MGDA is also a strong chelating agent for heavy metal ions, such as Fe and Cu, it enhances product stability and prevents negative effects of transition metals.

WACKER® MQ 803 TF is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit). Its chemical structure forms a three-dimensional network of polysilicic acid units, which are endblocked with trimethylsilyl groups. The product contains residual ethoxy and hydroxy functions. The average molecular weight can be precisely controlled by adjusting the ratio of M and Q units, with WACKER® MQ 803 TF having a ratio of approximately 0.67. WACKER® MQ 803 TF is a pure white powder that is manufactured to be largely free of volatile impurities, containing only trace amounts of aliphatic hydrocarbons. The product's low presence of fine dust particles and its uniform spherical particle shape contribute to its excellent rheological properties, particularly its flowability. As a result, common powder processing techniques such as bottling, conveying, and metering are simplified.

LIOSIL® eco MQ 803 is derived from the co-hydrolysis of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit). Its chemical structure can be described as a three-dimensional network of polysilicic acid units that are terminated with trimethylsilyl groups. Additionally, LIOSIL® eco MQ 803 contains residual ethoxy and hydroxy functional groups.

Dissolvine M-X is a high purity, versatile and readily biodegradable chelate. It can replace phosophorous-containing builders, enhance the cleaning power of a detergent, and prevent deactivation of surfactants in hard water. The active component is MGDA, a chelating agent with three carboxylic groups. Together with the central nitrogen atom these carboxylic groups provide strong multiple bonds with di- and trivalent metal ions. The small molecular size enables rapid action at low temperatures and in short contact time. The MGDA trisodium salt is fully REACH registered. Excellent low toxicity and low eco-toxicological permit non-dangerous labelling. MGDA-Na3 is listed on EPA’s Safer Chemical Ingredients List in the United States. As an ingredient in cleaning formulations, the MGDA in Dissolvine M-X improves the descaling and cleaning capabilities. This includes whiteness and color care benefits in laundry and stain removal abilities in automatic dish washing (ADW). Since MGDA is also a strong chelating agent for heavy metal ions, such as Fe and Cu, it enhances product stability and prevents negative effects of transition metals.

Berol 611 is a low foaming NPEO-free surfactant with excellent wetting and dissolving properties at room temperature. Suitable as replacers for NP 9/NP 10 surfactants.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Naxonac® 1595 is an anionic surfactant that can be used as an emulsifier in agrochemical and cleaning formulations due to its stability at high temperatures and in alkaline and electrolyte systems. It is also advantageous as it can act as a hydrotrope to couple nonionic surfactant systems that are not soluble, thereby increasing wetting and detergency properties.

Naxonac® 965 is an anionic surfactant that can be used as an emulsifier in emulsion polymerization, pesticides, and cleaning formulations due to its stability at high temperatures, high alkalinity, and electrolyte systems. Additionally, its solubility in alkali systems makes it a great hydrotrope that can be used to couple nonionic surfactant systems that are not normally soluble while simultaneously increasing wetting and detergency properties.

Naxchem® N-Foam 802 is a specialized blend of alkyl ether phosphate, designed for use in foaming applications and as a curing and foaming agent in resin production. When neutralized, it can be used as a cleaning agent. It is highly effective at producing stable foam.

Naxonac® 690-50 is an alkyl phenol ether phosphate designed to meet your needs as an emulsifier, imparting corrosion resistance in the emulsion polymerization of vinyl acetate and highly carboxylated acrylics and enhancing detergency in alkaline systems. It does not discolor when used to de-dust alkaline powders.

Naxonac® 8610 is an alkyl phenol ether phosphate designed to provide emulsification, solubility, coupling, and detergency in water-soluble applications. As an anionic surfactant, one of the main advantages of the phosphate ester is its stability and solubility in alkali systems. It can be used as hydrotropes to couple nonionic surfactant systems that are not soluble and at the same time increase wetting and detergency properties.

Naxonate® 4LS is our standard sodium xylene sulfonate, exhibiting reduced sulfone levels, which can be imperative for achieving clarity in formulated systems, especially upon dilution. The lower sulfone content helps the formulator consistently meet customer needs, and the product is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxonate® 4AX is an effective hydrotrope used in neutral detergents and shampoos. It imparts counter-ion compatibility as well as low sulfate levels. Hydrotropes are a proven answer to solubility problems in a wide variety of commercial applications. Optimum hydrotrope selection can result in enhanced system performance.

Naxonate® ST is a free-flowing powder with high activity as a hydrotrope. It is used as an anti-caking agent in powdered detergents and is commonly chosen for low sulfate and low sulfone formulations due to its effectiveness in high concentration recipes.

Naxsoft® NA-8 is an aqueous solution of a primary alkane sulfonate which exhibits low foaming, excellent coupling properties, and is biodegradable. It has excellent hydrotrope and wetting properties in both high and low pH systems, is soluble in both highly acidic and basic formulations, and is compatible with bleach. Naxsoft® NA-8 is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxonate® 4KT is a highly effective hydrotrope with performance similar to that of sodium xylenesulfonate and sodium toluenesulfonate. It imparts counter-ion compatibility. The major advantage of using Naxonate® 4KT in formulations is that it has a lower sulfate content compared to SXS and STS.

Naxonate® 4ST is an ideal hydrotrope for liquid detergents, with similar coupling performance to sodium xylenesulfonate but lower sulfate and sulfone levels. It generates essentially no foam or wetting action and has minimal influence on surface tension, providing a cost-effective way to solubilize complex formulas, elevate cloud points, and control viscosity.

ACCESS® SF 60,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 60,000 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions. This high viscosity fluid is suitable for use in applications that require a thicker lubricant film.

ACCESS® SF 12,500 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 12,500 cSt. This fluid is designed to meet the demanding requirements of the industrial, automotive, and electronics industries. It offers excellent lubrication and insulation properties, making it ideal for use in high-temperature environments. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 30,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 30,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

ACCESS® SF 10,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 10,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.

LIOSIL® eco F 50 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 50 mm²/s. During the manufacturing of LIOSIL® eco F 50, all fossil-based raw materials are replaced with renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Its unique chemical structure gives LIOSIL® eco F 50 exceptional properties that distinguish it from organic materials like mineral oils. Specifically, it exhibits a low surface tension and excellent spreading properties.

LIOSIL® eco F 350 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 350 mm²/s. During the manufacturing process of LIOSIL® eco F 350, all fossil-based raw materials are replaced by renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Its unique chemical structure gives LIOSIL® eco F 350 exceptional properties that differentiate it from organic materials like mineral oils. Notably, it exhibits a low surface tension and excellent spreading properties.

WACKER® AK 20 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.