Products in HI&I Care: Degreaser

BIO-SOFT® DR-13 is a versatile nonionic surfactant ideal for degreasing, wetting, and solubilization. It is well-suited for outdoor cleaners in applications like car and boat washes. Approved for direct release according to the u.S. Epa safer choice standard, it adheres to safety and environmental standards.

BIO-SOFT® N-400 is a nonionic surfactant blend with a low hlb, serving purposes in emulsification and boosting degreasing alongside higher hlb surfactants. It finds its place in hard surface applications, industrial cleaners, and detergents. It exhibits rapid wetting characteristics in comparison to np-4 and can be a substitute for nonylphenol ethoxylates.

BIO-SOFT® N-901 is a nonionic surfactant blend with an hlb of 12, making it a remarkable cleaner and detergent for hi&i applications. Its degreasing capabilities render it suitable for heavy-duty cleaning tasks. Additionally, it can function as an np-9 replacement. This product aligns with the u.S. Epa safer choice program’s surfactant screen and is listed on cleangredients.

BIO-SOFT® N-900 is a nonionic surfactant blend renowned for its cleaning, degreasing, and detergent properties. It can serve as a replacement for np-9 and be formulated into both concentrates and ready-to-use products. This versatile product remains stable in aqueous acidic and alkaline solutions. It also aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.Org.

BIO-SOFT® N-600 is a nonionic surfactant blend with an hlb (hydrophilic-lipophilic balance) value of 10.6. It serves purposes such as wetting, emulsification, and as a degreasing booster within industrial cleaners, detergents, and paint additives. In comparison to np-6 (nonylphenol ethoxylate), BIO-SOFT® N-600 demonstrates faster wetting properties and can serve as a replacement for nonylphenol ethoxylates. It meets the stringent requirements of the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

H-Soft™ AO-12 is a 30% active lauryl dimethylamine oxide that exhibits excellent wetting and detergency properties, as well as outstanding foam boosting and grease cutting qualities. It is acid and hypochlorite stable, and compatible with anionic, cationic, and nonionic surfactants. The exceptional quality of H Soft® AO-12 makes it suitable for use in a variety of markets and applications.

H-Soft™ ADBAC-80EL is a water-soluble, 80% active alkyl dimethyl benzyl ammonium chloride solution in water and ethanol. This cationic surfactant can be used alone or in combination with amphoteric, cationic, and nonionic surfactants. It provides degreasing, wetting, dispersing, detergent, and oil-solubilizing properties.

H-Soft™ ADBAC-80M is a water-soluble, 80% active alkyl dimethyl benzyl ammonium chloride solution in water and methanol. As a cationic surfactant, it can be used alone or in combination with amphoteric, cationic, and nonionic surfactants. It exhibits degreasing, wetting, dispersing, detergent, and oil-solubilizing properties.

H-Soft™ AO-1416 is a 30% active myristyl/cetyl (C14/16) dimethylamine oxide in water that can build viscosity and increase foaming capabilities. It is stable in acid, base, and hypochlorite, and is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality makes it suitable for a wide range of applications and markets.

H-Soft™ AO-10 is a highly effective 30% active decyl dimethylamine oxide that is widely used for its excellent wetting, detergency, foam boosting, and grease-cutting properties. This product is known for its acid, base, and hypochlorite stability and is compatible with a wide range of surfactants, including anionic, cationic, and nonionic varieties. With its exceptional quality, H-Soft™ AO-10 is suitable for use in a wide variety of markets and applications.

H-Soft™ QC -15 is a multifunctional surfactant with anti-static, dispersing, solubilizing, and foaming properties. It serves as an emulsifier, hydrotrope, and degreasing agent for electroplating baths, textile anti-statics, water-based degreasers, automotive and household cleaners, corrosion inhibitors, and personal care products like conditioners and lotions.

H-Soft™ AO-14 formula is a 29% active myristyl dimethylamine oxide in water that is known to build viscosity and increase foaming capabilities. Acid, base, and hypochlorite-stable, AO-14 is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality allows it to be applied in a wide range of applications and markets, such as in quality dishwashing detergents as a viscosity builder, grease remover, and rinsing agent.

Berol DGR 81 is an environmentally improved non-ionic surfactant blend with very good degreasing properties.

Ethomeen O/12LC is a tertiary amine ethoxylate, based on a primary oleyl amine.

Arquad T-50 is a cationic surfactant based on tallow amine - Tallowtrimethylammonium chloride.

Ethomeen T/12 is an ethoxylated tallow amine.

Ethomeen O/12 is a tertiary amine ethoxylate, based on a primary oleyl amine.

Berol 226 is all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

AG 6206 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.

Witconate NAS 88 sodium octane sulfonate is a low foaming hydrotrope, efficient degreaser and wetting agent for many applications. It is direct release, bleach stable and DFE approved. Listed on CleanGredients and Safer Choice.

Berol LFG 61 is a alcohol ethoxylate and alkylglucoside mix, complete surfactant package, low foaming nonionic surfactant blend.

Ethoquad C/25 is a cocoalkylmethyl[polyoxyethylene (15)] ammonium chloride

ADM d-Limonene Ultra High Purity (302002) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, flavors, fragrances, solvents, and degreasing agents. High-purity d-limonene is 99.4% pure, meaning it is considerably low in impurities. This leads to cleaner, more neutral products. It is most often used in fine fragrance applications.

ADM d-Limonene Technical Grade (301000) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, solvents, and degreasing agents. d-Limonene is the major component of the oil extracted from the citrus peel during the citrus juicing process. With its attractive citrus aroma, d-limonene is a naturally occurring biodegradable solvent and degreaser that can be used safely and effectively in a wide range of products.

ADM d-Limonene High Purity (302001) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, flavors, fragrances, solvents, and degreasing agents. High-purity d-limonene is 99.4% pure, meaning it is considerably low in impurities. This leads to cleaner, more neutral products. It is most often used in fine fragrance applications.

ADM d-Limonene Food Grade (302000) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in flavors, fragrances, solvents, and degreasing agents. d-Limonene is the major component of the oil extracted from the citrus peel during the citrus juicing process. With its attractive citrus aroma, d-limonene is a naturally occurring biodegradable solvent and degreaser that can be used safely and effectively in a wide range of products.

Berol XS is an optimized surfactant solution designed for cleaning and degreasing applications. It offers exceptional efficiency and versatility for all-purpose cleaning needs in both industrial and household settings. This ready-to-use surfactant simplifies the formulation process; just add builders and water to create effective cleaning solutions.

Ethylan 1008 SA is used as a wetting agent and degreaser.

Berol EZ-1 is an optimized surfactant for water based degreasing with an excellent environmental profile.

Berol 087 is a non-ionic surfactant based on n-primary alcohol. It has a hydrophilic (water soluble) character.

Berol 366 is a narrow range non-ionic surfactant based on a natural fatty alcohol of vegetable origin (RSPO MB).

Berol 226 SA is a all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

Berol SurfBoost AD15 is an amide ethoxylate.

Berol LS is an optimized surfactant-nanosilica blend for degreasing, with no streaking and anti-soiling benefits.

Berol Nexxt is a high-performance non-quat hydrotrope with cosurfactant properties that enhance cleaning and improve the stability of formulated products in hard surface and laundry applications. It is a clear liquid that is soluble in ethanol, isopropyl alcohol, and water.