Products in Water Treatment

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

STEPANQUAT® 200 is a quaternary used for odor control in water reclamation. Stepanquat 200 is miscible with soft and hard water (400 ppm caco3) in all proportions, as well as with alcohol and acetone in all proportions. Stepanquat 200 is insoluble in ether, benzene, petroleum, and/or chloroform. Stepanquat 200, at the recommended use level, does not contribute to the corrosion of metal compounds.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

PULPSIL® 822 E is a medium-viscous, highly effective silicone antifoam emulsion developed specifically for use in pulp mills. It is characterized by its very good knock-down efficiency, long-term efficiency, compatibility, and excellent stability. PULPSIL® 822 E acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

SABIC's Specialties Business NORYL GTX830 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8200 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX830 resin is an excellent candidate for a wide variety of applications including automotive under the bonnet applications and water meter housings. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ 731F resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This NSF/ANSI 61* listed for potable water use, FDA Food Contact compliant, injection moldable grade exhibits good surface appearance, high ductility, and good impact resistance along with low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability. NORYL™ 731F resin is an excellent candidate for a variety of water management applications such as valves, filtration components, and water meter internals. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ FE1630PW resin is a 30% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL™ FE1630PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ FE1410PW resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL™ FE1410PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ 731S resin is a non-reinforced blend of Polyphenylene ether (PPE) + polystyrene (PS). This injection moldable resin is FC EU, FDA food contact compliant and has NSF/ANSI 61, ACS, WRAS, and KTW/W270 listings for selected colors and manufacturing locations. NORYL™ 731S resin exhibits good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability. NORYL™ 731S resin is an excellent candidate for a variety of water management applications such as valves, filtration components, and water meter internals. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL WM330G resin is a 30% glass fiber reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is available. NORYL WM330G resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ FE1520PW resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL™ FE1520PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ FE1740PW resin is a 40% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL™ FE1740PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

TEGO® Antifoam KE 600 EC is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

TEGO® Antifoam KE 600 is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

TMT 15® is an environmentally friendly solution used to separate and remove heavy metals from wastewater generated in numerous industrial applications. It enables compliance with strict environmental regulations and offers high effectiveness in various applications. TMT 15® is non-toxic, non-hazardous, has good ecological properties, and can be handled safely without unpleasant odors. It benefits from experienced application and technical competence.

VISIOMER® MADAME is a monofunctional methacrylate with a tertiary amino group in the side chain. It is an ideal ingredient for improving the adhesion of formulations. This monomer is widely used in the preparation of cationic polymers, particularly quaternary ammonium polymers and flocculants. Industries such as coatings, oil and gas, paper, and personal care can benefit from the unique properties of VISIOMER® MADAME.

DYNOCEL® 900 is a 20 x 50 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

N,N-Bis-(3-aminopropyl)methylamine (BAPMA) is a colorless to yellow liquid with an amine odor. BAPMA is fully soluble in water in all proportions. is a liquid that ranges in color from colorless to yellow and possesses an amine odor. It is completely soluble in water, regardless of the proportion. BAPMA serves as a chemical intermediate in various industries, including agriculture, pulp and paper, textiles, and water treatment.

DYNOL® 607 is a high-performance, non-ionic superwetter capable of delivering the exceptional equilibrium and dynamic surface tension reduction synonymous with the Dynol name. It also boasts improved ease-of-incorporation and formulation compatibility compared to the more hydrophobic DYNOL® 607 Surfactant. Furthermore, comparative wetting performance tests have confirmed that DYNOL® 607 Surfactant is a valuable replacement for conventional fluorosurfactants and offers a cost-effective, non-persistent alternative to emerging fluorosurfactant technology.

VISIOMER® N-iPMAA (N-isopropyl methacrylamide) is an alkylated methacrylamide widely employed as a building block in the creation of polymers specifically designed for applications in various industries. These industries include health care, oil and gas, paper, personal care, textile and leather, as well as water treatment. In the oil and gas sector, VISIOMER® N-iPMAA serves as a crucial component for developing polymers that can withstand the demanding conditions of this industry.

DYNOCEL® 600 is a 14 x 28 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOCEL® 900 is a 28 x 48 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

VISIOMER® DMAPMA (3-Dimethylamino propyl methacrylamide) is an amino functional methacrylamide monomer. Its methacrylamide structure provides increased hydrolytic stability compared to methacrylic esters. This monomer is commonly used to enhance pigment wetting and improve substrate adhesion to polymers. Industries such as coatings, oil and gas, paper, personal care, and healthcare can benefit from the unique properties of VISIOMER® DMAPMA.